Results 11 to 20 of about 69,801 (268)
E3S Web of Conferences, 2017 Erosion caused by solid particles transported with the steam or flue gas has a negative impact on the power unit reliability and availability. The erosion rate depends inter alia on the restitution of the particle velocity upon impact.
Hernik Bartłomiej +3 more
doaj +1 more source
Capacitor Bank Sizing for Squirrel Cage Induction Generators Operating in Distributed Systems
IEEE Access, 2020 The design of the capacitor bank to be placed with the squirrel cage induction generator, when operating with a direct connection to the distribution system, is performed from the value of the magnetization reactance of the machine.
Eudinei O. Silva +2 more
doaj +1 more source
Frontiers in Energy Research, 2021 This article proposes a new differential-cascading-based dual-stator brushless doubly-fed induction machine with a staggered dual cage rotor. Conventional differential mode of the brushless doubly-fed machine with cage rotor suffers from the low number ...
Yu Zeng +3 more
doaj +1 more source
Possibility analysis of combustion of torrefied biomass in 140 t/h PC boiler
E3S Web of Conferences, 2016 The study attempts to evaluate the impact of combustion of torrefied willow (Latin: Salix viminalis) and palm kernel shell (Latin: Elaeis guineensis) on the heat exchange in a 140 t/h PC boiler through an analysis of 6 cases for different boiler loads ...
Jagodzińska Katarzyna +2 more
doaj +1 more source
Review of dielectric elastomers for actuators, generators and sensors
IET Nanodielectrics, 2020 Electroactive polymer (EAP) is a kind of smart material, which can change its shape under the stimulation of electric field. Dielectric elastomer (DE) is an important member of the EAP.
Yu Zhao +4 more
doaj +1 more source
Machines, 2023 Permanent magnet synchronous generators (PMSGs) with high output density per unit volume are becoming widespread in wind-power generation systems. Among them, spoke-type PMSGs are more challenging to magnetize than other PMSGs, owing to their structural ...
Dong-Ho Kim +4 more
doaj +1 more source
Simplified method for calculating SNCR system efficiency
E3S Web of Conferences, 2017 SNCR (Selective Non-Catalytic Reduction) technology is aimed at reducing NOx emissions. SNCR efficiency is appropriately high only for the reaction temperature range called ‘the SNCR temperature window’.
Pronobis Marek +3 more
doaj +1 more source
Comparison between Using FLC and Auto-Tuning FLC in Synchronous Generator Transient Voltage Stability Enhancement [PDF]
Engineering and Technology Journal, 2013 This paper compares between responses of Fuzzy Logic Controller (FLC) based exciter and auto-tuning FLC based exciter. Both of the exciters are simulated separately with synchronous generator connected to infinite bus through a short transmission line ...
Majli Nema Hawas, Abdullah Yaseen Abbas
doaj +1 more source
Generating circuits with generators
Proceedings of the ACM on Programming Languages, 2022 The most widely used languages and methods used for designing digital hardware fall into two rough categories. One of them, register transfer level (RTL), requires specifying each and every component in the designed circuit. This gives the designer full control, but burdens the designer with many trivial details.
openaire +1 more source
STUDY OF GRAIN DRYING IN THE AUTOMATED GRAIN DRYING UNIT
Сельскохозяйственные машины и технологии, 2018 Mine and column grain dryers are a fairly complex object of control in the production line. The process of grain drying is characterized by a large number of parameters, quantitatively and qualitatively characterizing the dryer operation.
S. A. Pavlov, T. F. Frolova
doaj +1 more source