Results 1 to 10 of about 14,729 (212)
Influence of Size Reduction of Fly Ash Particles by Grinding on the Chemical Properties of Geopolymers [PDF]
Applied Sciences, 2018 Chemical properties of geopolymers were evaluated from the reduction of fly ash particle size by grinding. X-ray diffraction determined that at early curing ages new crystalline phases appear in the matrix of the geopolymer and they remain for 28 days ...
Carlos Antonio Rosas-Casarez +6 more
doaj +5 more sources
Influence of silica-fume’s addition technique and curing conditions on microstructure, physical and mechanical properties of geopolymer [PDF]
Scientific ReportsGeopolymer as ecofriendly and energy saving material is estimated as excellent building material in construction sector. The current study focuses on studying the influence of silica fume mixing technique, its contents (2.3, 4.6, 6.9%) and curing ...
Hala A. Hossein +2 more
doaj +2 more sources
Sustainable Ash-Based Geopolymers
Chemical Engineering Transactions, 2018 The valorisation of industrial solid by-products into geopolymers, a new class of inorganic polymers, provides two main benefits. Firstly, it solves a significant waste management problem by the transformation of potentially dangerous industrial wastes ...
Vayos G Karayannis +3 more
doaj +2 more sources
Durability of geopolymers and geopolymer concretes: A review
Reviews on Advanced Materials Science, 2021 Geopolymers are green materials with three-dimensional silicon and aluminum tetrahedral structures that can be serving as environmentally friendly construction materials and therefore have the potential to contribute to sustainable development.
Lingyu Tian +3 more
doaj +2 more sources
Effect of Naoh Molar Concentration on Microstructure and Compressive Strength of Dolomite/Fly Ash-Based Geopolymers [PDF]
Archives of Metallurgy and Materials, 2022 Dolomite can be used as a source of aluminosilicate to produce geopolymers; however, this approach is limited by its low reactivity. This study analyzes the viability of producing geopolymers using dolomite/fly-ash with sodium silicate and NaOH solutions
Emy Aizat Azimi +9 more
doaj +1 more source
Case Studies in Construction Materials, 2023 3D printing is a developing technology that has the ability to use different materials to produce concrete elements with complex shapes. The utilization of geopolymers or alkali-activated materials (AAMs) in 3D printing is receiving significant interest ...
Yazeed A. Al-Noaimat +3 more
doaj +1 more source
Buildings, 2021 Unreinforced masonry (URM) structures are vulnerable to earthquakes; thus, materials and techniques for their strengthening and restoration should be developed. However, the materials used in some of the existing retrofitting technologies for URM and the
Anabel B. Abulencia +8 more
doaj +1 more source
Open Ceramics, 2022 Geopolymers can be optimized to have interesting physical characteristics, which are influenced by the raw materials and additives utilized in their formulations. For this reason, various formulations of two metakaolin-based binders with filler additions
Paolo Scanferla +4 more
doaj +1 more source
Applied Sciences, 2022 Geopolymers are created by mixing a source of aluminosilicates, which can be natural or by-products of other industries, with an alkaline solution, which dissolves the aluminates and silicates present in this source, where after a polymerization process,
Hengels Castillo +4 more
doaj +1 more source
Research on thermal stability of coal gasification coarse slag based geopolymer
矿业科学学报, 2022 Coal gasification crude slag can be used as a precursor to prepare geopolymer, and its high temperature resistance needs to be further explored.
Lü Zhengye +4 more
doaj +1 more source