Results 41 to 50 of about 9,504 (188)
Review and prospects of shear test of bolted rock joints
Deep Underground Science and Engineering, EarlyView.The laboratory shear test equipment, test method, and numerical simulation of bolted rock joints were summarized. The shortcomings and limitations of the current research were analyzed, and the research prospects were proposed. Abstract Rock bolting is a critical approach in geotechnical engineering for supporting weak rocks.
Shulin Ren +4 more
wiley +1 more source
Deep Underground Science and Engineering, EarlyView.Based on experimental results and theoretical analysis, an established rock damage accumulation model that comprehensively considers the preapplied static load, impact peak value, impact frequency, and impact times. Abstract To study the rock damage mechanism under high static loading and superimposed medium strain rate cyclic impact loading, a series ...
Wei Wang +6 more
wiley +1 more source
Applied Sciences, 2023 This manuscript presents a relevant practical application of the stability analysis of multi-face slopes that uses the concept of the restricted daylight envelope in multi-faced slopes (MFS).
Cesar Patricio Borja Bernal +1 more
doaj +1 more source
, 2021 Many complex problems typical of geotechnics can be adequately addressed with the tools of dimensional analysis and physical modelling. Geotechnical models in which body forces are important can be classified into two main categories: (i) models in the ...
Sandro G. Longo, Longo S. G.
core +1 more source
Exploring wave propagation behaviors in rock: A grain‐based perspective on mineral structures
Deep Underground Science and Engineering, EarlyView.This study investigates wave propagation in rock at the grain scale using a grain‐based model, revealing that mineral elastic modulus significantly influences wave attenuation while grain size and distribution have limited effects. A novel peak particle velocity attenuation prediction model is proposed and validated for grain‐scale wave propagation ...
Zhiyi Liao +3 more
wiley +1 more source
Facta Universitatis. Series: Architecture and Civil EngineeringThe geotechnical engineering calculations are usually carried out according to the small deformation and displacement theory (infinitesimal strain theory) i.e. first-order theory.
Borko Miladinović
doaj +1 more source
Deep Underground Science and Engineering, EarlyView.A novel cavity contraction solution and multilayer shaft wall model were developed to analyze deep shaft stability, considering rock viscosity, support structures, and water pressure, with successful validation through a Hulusu Coal Mine case study.
Bin Chen +5 more
wiley +1 more source
Physics-Based Machine Learning for Vibration Mitigation by Open Buried Trenches
Applied SciencesMitigating ground vibrations from sources like vehicles and construction operations poses significant challenges, often relying on computationally intensive numerical methods such as Finite Element Methods (FEM) or Boundary Element Methods (BEM) for ...
Luís Pereira +5 more
doaj +1 more source
Deep Underground Science and Engineering, EarlyView.This study examines energy evolution in rock rupture via triaxial direct shear tests, exploring the impact of confining pressure and temperature on fracture surface randomness. A novel energy‐based brittleness index is proposed, validated experimentally, and compared with existing methods for reliability and accuracy.
Biao Wang +5 more
wiley +1 more source
Deep Underground Science and Engineering, EarlyView.Joint orientation significantly affects P‐wave velocity, with the highest velocity at zero‐degree angles, decreasing to 30° as the angle increases. The velocity increases slightly from 30 to 45 degrees but sharply decreases from 45 to 90 degrees. Abstract Determination of the required parameters in different science contexts using the ultrasonic wave ...
Yaghoob Zarei +4 more
wiley +1 more source