Results 41 to 50 of about 574,775 (169)
Analysis of the bond stress when using GFRP bars
Holos, 2021 For most of the structural solutions, the construction industry in Brazil is based on the use of conventional reinforced concrete elements composed of concrete and steel bars.
Gláucia Maria Dalfré +4 more
doaj +1 more source
Polymer Composites, EarlyView.Functionally graded Ag/Fe3O4‐loaded PAN nanofiber interlayers for improved mechanical performance and EMI attenuation in GFRP laminates. ABSTRACT Functionally graded Ag/Fe3O4‐loaded polyacrylonitrile (PAN) nanofiber interlayers were placed between selected glass fabric plies to improve interlaminar damage resistance in glass fiber‐reinforced polymer ...
Hasan Ulus +5 more
wiley +1 more source
High elastic modulus GFRP rebar: A guide to manufacture and design of the influencing parameters
Composites Part C: Open AccessGlass fibre reinforced polymer (GFRP) bars are increasingly used as internal reinforcement to concrete infrastructures exposed to harsh environment. A wide range of GFRP bars are commercially available but with high discrepancy in properties due to the ...
Omar Alajarmeh +2 more
doaj +1 more source
Polymer Composites, EarlyView.Amino‐silane treatment improves the basalt fiber–PA6 interface, enhancing composite performance. ABSTRACT Basalt fiber‐reinforced polymer (BFRP) composites have emerged as sustainable alternatives to glass fiber (GF) composites, but their performance is often controlled by the quality of the fiber–matrix adhesion.
Mohammad Mezbah Ul Hoque +3 more
wiley +1 more source
Axial-Flexural Interactions of GFRP-CFFT Columns with and without Reinforcing GFRP Bars
Journal of Composites for Construction, 2017 AbstractThis study presents the results of an experimental program and analytical modeling for axial-flexural interactions of concrete-filled glass fiber–reinforced polymer tube (GFRP-CFFT) columns...
Khan, Qasim S +2 more
openaire +3 more sources
Polymer Composites, EarlyView.Thermal Aging and Tribological Tests of Additive Manufactured PLA Composites. ABSTRACT This study focuses on the additive manufacturing of pure polylactic acid (PLA) specimens and milled glass fiber (GF)‐filled PLA composites under thermal cycling aging and wear tests. Wear tracks have been analyzed via 3D optical profiling and SEM imaging.
Sinan Fidan +5 more
wiley +1 more source
Polymer Composites, EarlyView.Veil interlayers of five different chemistries (PI, FG, PPS, PEI, PEEK) were placed at two through‐thickness positions in carbon and glass fiber/epoxy laminates and evaluated under interlaminar shear (ILSS), three‐point bending (3PB) and axial buckling loading. The optimum placement was found to be loading mode dependent: near‐surface placement favored
Yavuz Selim Tarih +3 more
wiley +1 more source
Case Studies in Construction Materials, 2023 GFRP (Glass-fiber reinforced polymer) bars are recognized as a structural material enabling replace existing steel rebar. However, GFRP bars exhibit a decrease in tensile strength under severe conditions such as strong alkalinity, high salinity, and ...
Chaeyeon Go +5 more
doaj +1 more source
Polymer Composites, EarlyView.Experimental and numerical assessment of GFRPP under lower experimental hydrogen pressures using tensile testing, SEM analysis, and hydrogen uptake estimation. ABSTRACT Glass fiber‐reinforced polypropylene (GFRPP) composites are increasingly explored for hydrogen transport and storage due to their lightweight nature and corrosion resistance.
Ahmadyar Qureshi +3 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract The use of fiber reinforced concrete (FRC) in precast tunnel segments is among the most established and representative applications of this material. Over the past two decades, numerous tunnel linings were constructed with partial or total substitution of conventional steel reinforcement by fibers, this yielding to quantifiable benefits in ...
Vladimir Rusanov +4 more
wiley +1 more source