Results 51 to 60 of about 2,373,608 (351)
Advanced Engineering Materials, EarlyView.Laser surface texturing significantly improves the corrosion resistance and mechanical strength of 3D‐printed iron polylactic acid (Ir‐PLA) for marine applications. Optimal laser parameters reduce corrosion by 80% and enhance tensile strength by 25% and ductility by 15%.
Mohammad Rezayat +6 more
wiley +1 more source
Mechanism of silver/glass interaction in the metallization of crystalline silicon solar cells
Materials Research Express, 2020 In order to reveal the interaction between solid substances (Ag powder and glass frit) during the metallization of crystalline silicon solar cells, the effect of glass frit on the Ag powder sintering and the mechanism of Ag colloid formation in glass ...
Xinjie Sun +7 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.The growing demand for lightweight, nontoxic, and multifunctional gamma shielding materials has intensified efforts to find alternatives to conventional lead and aluminum‐based protectants. In this work, we develop epoxy quartz fabric composites reinforced with cobalt chloride (CoCl2) microparticles, fabricated via hand lay‐up with varying filler ...
Summan Urooge +7 more
wiley +1 more source
Journal of Engineering and Sustainable Development, 2020 The purpose of this paper is to discuss the influence of adding eggshell and calcium carbonate powder reinforced with glass fibers and epoxy resin. Hand Lay-upimethod was utilized for the preparation of samples from epoxyiresin as a matrix material with (
Marwah Subhi Attallah
doaj +3 more sources
Advanced Engineering Materials, EarlyView.Carbon nanomaterial‐reinforced epoxy composites exhibit pronounced piezoresistive behavior, enabling intrinsic damage sensing under cyclic and fatigue loading. This review critically compares carbon nanotube and graphene systems, correlating filler content, percolation threshold, and gauge factor with sensing stability and damage evolution.
J. M. Parente +3 more
wiley +1 more source
Pembuatan Foam Glass Menggunakan Limbah Pecahan Kaca dan Abu Terbang (Fly Ash) dari Pabrik Sawit [PDF]
, 2016 Foam glass can be produced using cullet and fly ash with addition of dolomite as foaming agent. The aim of this research is to study the influence of adding compositon of glass powder and dolomite on the characterize of the foam glasses and to determine ...
', B. (Bahruddin) +2 more
core
Melt infiltration casting of bulk metallic-glass matrix composites [PDF]
, 1998 The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter.
Conner, R. D. +2 more
core +1 more source
Mechanical Behavior of Reactive Powder Concrete with Glass Powder Substitute
Procedia Engineering, 2015 AbstractAs reported in literature, the Reactive Powder Concrete (RPC) with quartz powder substitute has a high compressive strength of 180MPa and has a fairly high tensile strength. That research used the RPC with quartz powder to cement ratio of 30% and steam curing technique in an autoclave temperature of 250°C.
Kushartomo, Widodo +2 more
openaire +1 more source
3D‐Printed Giant Magnetoresistive (GMR) Sensors Based on Self Compliant Springs
Advanced Engineering Materials, EarlyView.This work explores 3D‐printed GMR sensors utilizing self‐compliant spring structures and conductive PLA composites. By optimizing arm width, we achieved high piezoresistive (0.34%/mm) and magnetoresistive (0.77%/mT) sensitivities. Demonstrated through Bluetooth‐integrated pressure and magnetic position sensing, these full printed low‐cost, customizable
Josu Fernández Maestu +4 more
wiley +1 more source
Scientific AfricanThe rising global cost of housing demands innovative solutions to improve construction materials and reduce expenses, making affordable housing more attainable.
Abayomi Adewale Akinwande +6 more
doaj +1 more source