Results 251 to 260 of about 2,571,636 (343)

Optimized Strategy for Fabricating High‐Aspect‐Ratio Periodic Structures Over Large Areas Using ps‐Direct Laser Interference Patterning

open access: yesAdvanced Engineering Materials, EarlyView.
Picosecond direct laser interference patterning (DLIP) enables precise microstructure fabrication on stainless steel. Using a multiscan approach, high‐aspect‐ratio patterns are achieved. Fluence influences structure growth and homogeneity, with smaller periods yielding better uniformity.
Fabian Ränke   +5 more
wiley   +1 more source

Surveillance of perchlorate in ground water, surface water and bottled water in Kerala, India. [PDF]

open access: yesJ Environ Health Sci Eng, 2015
Nadaraja AV   +2 more
europepmc   +1 more source

Titanium‐S23: A New Alloy with Ultra‐High Tensile Toughness Directly from the Solid‐State Processing of Recycled Ti–6Al–4V and Ti–5Al–5Mo–5V–3Cr Powders using Field Assisted Sintering Technology

open access: yesAdvanced Engineering Materials, EarlyView.
This study explores combining two existing aerospace titanium alloy powders, processing them via field‐assisted sintering technology and the subsequent discovery of a novel alloy composition, termed S23, with ultra‐high tensile toughness. Fine‐scale alpha precipitates favorably form in the alloy despite the relatively slow cooling, providing an ...
Samuel Lister   +2 more
wiley   +1 more source

Mitigation of Cracks in High‐Performance Nickel‐Based Superalloys in Powder Bed Fusion Laser Beam of Metals Using a Metal Matrix Composite Approach

open access: yesAdvanced Engineering Materials, EarlyView.
High‐performance nickel‐based superalloys are often not processible in additive manufacturing (AM) due to hot cracking. The findings in this manuscript propose an efficient method to mitigate cracking and enhance mechanical properties of these alloys by producing a metal matrix composite, contributing to the material and process perspective of the AM ...
Klaus Büßenschütt   +3 more
wiley   +1 more source

Investigation of Iron‐Aluminide‐Like Phase Composition in Complex Concentrated Fe32Cu12Ni11Ti16Al29 Alloy

open access: yesAdvanced Engineering Materials, EarlyView.
This work reveals the phase composition and quantitative morphology analysis of precipitation‐hardened Fe32Cu12Ni11Ti16Al29 complex‐concentrated alloy. The precipitates are shown to have a high coherency. Morphology transition between sphere, cuboidal, and elongated morphology is observed. Finally, the overaging behavior is captured using microhardness.
Rostyslav Nizinkovskyi   +4 more
wiley   +1 more source

Reactive Interaction and Wetting of Fe‐ and Mn‐Containing, Secondary AlSi Alloys with Manganese Oxide Ceramic Filter Material for Fe Removal

open access: yesAdvanced Engineering Materials, EarlyView.
Fe‐ and Mn‐containing AlSi alloys undergo aluminothermic reaction with Mn oxide in sessile‐drop and crucible experiments forming poor‐wetting Al2O3 while Mn enriches in the alloy. Primary Fe‐containing particles are preferentially attached to the Mn oxide.
Hanka Becker   +6 more
wiley   +1 more source

Home - About - Disclaimer - Privacy