Results 111 to 120 of about 3,855 (161)
Comparative Study of Activated Flux-GTAW and Multipass-GTAW Dissimilar P92 Steel-304H ASS Joints
In the present study, welding of P92 steel and 304H austenitic stainless steel (304H ASS) plates (thickness: 8 mm) was performed using activated flux-gas tungsten arc welding (activated flux-GTAW) and compared with the multipass-gas tungsten arc welding (
Pratishtha Sharma +1 more
exaly +3 more sources
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Applied Mechanics and Materials, 2021
This present investigation explore the microstructural properties of SDSS grade SAF2507 weldments produced by constant current GTAW and constant current GTAW with superimposed high frequency (HF) current. The macro, microstructural examination and mechanical characterization were performed.
Rajeev Kumar +3 more
openaire +1 more source
This present investigation explore the microstructural properties of SDSS grade SAF2507 weldments produced by constant current GTAW and constant current GTAW with superimposed high frequency (HF) current. The macro, microstructural examination and mechanical characterization were performed.
Rajeev Kumar +3 more
openaire +1 more source
Journal of Materials Processing Technology, 2020
Abstract A notable advantage of the GTAW process with the use of a hot wire is the higher deposition rate, which can be twice as high as that achieved with a cold wire for the same welding current. In the conventional procedure, the wire is heated through the passage of current to create heat by the Joule Effect.
Anna Louise Voigt +2 more
openaire +1 more source
Abstract A notable advantage of the GTAW process with the use of a hot wire is the higher deposition rate, which can be twice as high as that achieved with a cold wire for the same welding current. In the conventional procedure, the wire is heated through the passage of current to create heat by the Joule Effect.
Anna Louise Voigt +2 more
openaire +1 more source
Droplet Transfer in Arcing-Wire GTAW
Journal of Manufacturing Processes, 2016Abstract In arcing-wire GTAW process, the wire melting speed and weld penetration are decoupled. To well study the arcing-wire GTAW, especially the droplet transfer mode, the forces imposed on the droplet are analyzed firstly and compared with those in conventional GMAW. Then the experiments have been carefully designed and conducted.
Ning Huang, Jianchao Han
exaly +2 more sources
Model Predictive Control of GTAW Weld Pool Penetration
IEEE Robotics and Automation Letters, 2019Weld pool penetration is a major indicator of weld integrity but it is not directly measurable. The key to solving this issue is to find or create observable phenomena that can be used to derive the penetration. An innovative method has recently been proposed/developed to derive the penetration from the reflection of projected laser from an oscillating
Jinsong Chen +3 more
openaire +1 more source
Effect of GTAW on the Mechanical Properties of Mild Steel
Journal of Advanced Mechanical Engineering Applications, 2022Tungsten metal arc welding (GTAW) is a highly popular welding technique in manufacturing. The welding factors such as welding current, voltage, speed, and gas flow rate play a significant role in determining the welding quality. This study discusses the effect of GTAW factors on the mechanical properties of commercial steel welding. Base
Saleh Suliman Saleh Elfallah +2 more
openaire +1 more source
Development of Activated Flux for Deep Penetration in GTAW
Materials Today: Proceedings, 2019Abstract Gas metal tungsten (TIG) welding is one of the best suited fabrication methods in industries due to lower capital cost, contamination free and sound quality of weld joints. However, there are few drawbacks like the limited penetration capacity and limited productivity in TIG welding.
Sanjib Jaypuria +3 more
openaire +1 more source
Improvement of Arc Properties in GTAW of Aluminium Alloys
Materials Science Forum, 2019Gas tungsten arc welding (GTAW) is a widely used method of joining aluminium and its alloys. Despite the fact that a lot of research has been done in this area for several decades, there are many unresolved issues on the welding process control. Optimization of square wave alternating current profiles is one of them.
Aleksey S. Kiselev +2 more
openaire +1 more source
Comparison of SMAW and GTAW Welding Properties
Mechanics Exploration and Material InnovationLow carbon steel is a type of welding with good formability, machinability, hardenability, and weldability. It can be welded without preheating or postheating processes. Notch strength and sensitivity to weld cracking are the factors that influence the weldability of low carbon steel. SMAW and GTAW welding techniques were applied in this study.
Zul Afriansyah +2 more
openaire +1 more source

