Results 31 to 40 of about 13,025 (254)
Arc pressure and weld metal fluid flow whilst using alternating shielding gases Part 1 : arc pressure measurement [PDF]
, 2013 As part of an ongoing process to fully evaluate the effects of an alternating shielding gas supply on gas shielded welding processes, a comparison between the arc pressures generated using argon, helium, alternating shielding gases and pulsed GTAW has ...
Campbell, Stuart +2 more
core +1 more source
Advances in Materials Science and Engineering, Volume 2022, Issue 1, 2022., 2022 In present experimental work, 310 SS alloy has been welded by the TIG welding using design of experiment and grey relation optimization techniques. The input parameters, i.e., welding current, welding gas flow rate, and welding voltage, have been selected to perform the TIG welding.
Ashish Goyal +6 more
wiley +1 more source
Teknik, 2021 The welding use correct process parameters will produce joint with optimum in mechanical properties. The current is a very important process parameter in welding.
Tarmizi Tarmizi +2 more
doaj +1 more source
Materials, 2022 The 9% Cr steels were developed for ultra-supercritical (USC) power plants to meet the requirements of high operating temperature and pressure. These steels are produced to operate at high temperatures where impact toughness is not a concern; however, it
Sachin Sirohi +8 more
semanticscholar +1 more source
Arc pressure and weld metal fluid flow whilst using alternating shielding gases Part 2 : arc force determination [PDF]
, 2013 The transient variation of the shielding gas present in the alternating shielding gas process produces a dynamic action within the liquid weld metal. Flow vectors opposite in direction have been reported due to the various forces acting on the weld metal
Campbell, Stuart +2 more
core +1 more source
Medžiagotyra, 2020 To resolve the problem of grain coarsening occurring in the fusion zone and the heat-affected zone during conventional gas tungsten arc welding(C-GTAW) welded titanium alloy, which severely restricts the improvement of weld mechanical properties, welding
Wei LI +3 more
doaj +1 more source
Metals, 2022 In this work, an Inconel 625 thin-wall structure was fabricated by the gas tungsten arc welding (GTAW) hot-wire arc additive manufacturing process.
Xiaoli Wang +6 more
semanticscholar +1 more source
Review of GTAW Welding Parameters
Journal of Minerals and Materials Characterization and Engineering, 2018 Welding as a fabrication process is one of the vital production routes for most manufacturing industries. Several factors are involved in the choice of welding process for specific applications; notable among these are compositional range of the material to be welded, the thickness of the base materials and type of current.
Bolarinwa Johnson Kutelu +3 more
openaire +2 more sources
An evaluation of weld metal nitrogen retention and properties in 316NL austenitic stainless steel [PDF]
, 2011 A series of tests were conducted using varying levels of nitrogen and helium in a conventional argon shielding gas when welding 316LN austenitic stainless steel. The outcome was that a 15 per cent nitrogen addition to the argon shielding gas had the most
Baker, Thomas +2 more
core +1 more source
Investigation of low current gas tungsten arc welding using split anode calorimetry [PDF]
, 2016 Most previous split anode calorimetry research has applied high weld currents which exhibit pseudo Gaussian distributions of arc current and power density.
Colegrove, Paul A. +2 more
core +1 more source