Results 41 to 50 of about 13,025 (254)
Revista de Metalurgia, 2018 Este artículo estudia el efecto de la soldadura de raíz (GTAW) con ERNiCrMo-3 sobre la microestructura y propiedades mecánicas de una unión de fundición nodular cuando las pasadas de la cubierta se realizan con la técnica SMAW con electrodos de Ni.
Manuel Pascual-Guillamón +3 more
doaj +1 more source
Comparative study of activated flux-GTAW and multipass-GTAW dissimilar P92 steel-304H ASS joints
Materials and Manufacturing Processes, 2019 In the present study, welding of P92 steel and 304H austenitic stainless steel (304H ASS) plates (thickness: 8 mm) was performed using activated flux-gas tungsten arc welding (activated flux-GTAW) and compared with the multipass-gas tungsten arc welding (multipass-GTAW).
Pratishtha Sharma +1 more
openaire +1 more source
Penetration Estimation of GTAW with C-Type Filler by Net Heat Input Ratio
Welding Journal, 2022 This study proposes a novel method to estimate the weld penetration in gas tungsten arc welding (GTAW) with filler metal. So far, there is no standard parameter available to accurately estimate penetration in GTAW with filler metal.
Muralimohan Cheepu +3 more
semanticscholar +1 more source
Communications, 2020 Use of the powder metallurgy (PM) in production of various components has been growing in the automotive industry, including production of sintered stainless steels (SSSs).
Barbara Lisiecka +2 more
doaj +1 more source
Giga-Cycle Fatigue Behavior of the Nuclear Structure of 316L Weldments
Frontiers in Energy Research, 2021 Some components made of 316L stainless steel in nuclear reactors are connected by welding, and these are under giga-cycle fatigue loading. Therefore, the giga-cycle fatigue behavior of 316L weldments, which are fabricated by Laser Beam Welding (LBW) and ...
Zhihong Xiong +3 more
doaj +1 more source
Journal of Materials Research and Technology, 2021 A comparative study was carried out on GTAW AISI 316 welds fabricated by three different filler metals including ER-317M, ER-316 and ER-308. Filler metals were selected in a way to induce a varying Molybdenum (Mo) concentrations in the weld metal, so ...
F. Ostovan +4 more
semanticscholar +1 more source
Corrosion resistance of the dissimilar alloy AL6XN-Inconel 718 in 0.5 M NaCl
Materials Research Express, 2021 In the present work, the corrosion resistance of the dissimilar alloy AL6XN-Inconel 718 bound by the Gas Tungsten Arc Welding (GTAW) method was studied. Different alloy zones were analyzed: base materials (BMs), heat affected zones (HAZs) and welds.
Natalya V Likhanova +5 more
doaj +1 more source
Dry Sliding Wear Resistance of Fe-Cr-C hardfacing Deposited by Flux-Core-Double-Wire GTAW
Materials Research, 2023 Gas-Shielded Tungsten Arc Welding (GTAW) was modified to a Flux-Cored-Double-Wire GTAW (FCDW-GTAW); in this technique, wires of different compositions are used simultaneously to obtain different microstructures. In the modified GTAW, automatic flux-cored
Fernando Henrique Gruber Colaço +6 more
doaj +1 more source
Shielding Gases for Improved GMAW and GTAW Processes
JOURNAL OF THE JAPAN WELDING SOCIETY, 2010 Against a background in which most of the welding consumables produced are for GMAW, and GTAW is irreplaceable for the high-quality welding of a wide range of base metals including active metal, th...
Yu-Ichi Ikegami +3 more
openaire +2 more sources
Metals, 2018 Cast austenitic stainless steel (CASS) often contains high contents of silicon, phosphorus, and sulfur to prompt low melting phases to form in the welds. As a result, welding defects can be induced to degrade the welds.
Sheng-Long Jeng +3 more
doaj +1 more source