Results 11 to 20 of about 1,966 (225)

Gypsum-based composites reinforced with bamboo particles

open access: yesRevista Brasileira de Engenharia de Biossistemas
This study aimed to evaluate the quality of gypsum-based mineral composites reinforced with bamboo particles. The particles size was 1.68 mm and 0.841 mm. The density adopted for the composites was 0.80 g/cm³.
Flávia Maria Silva Brito   +4 more
doaj   +2 more sources

Flexural Behavior of Innovative Glass Fiber-Reinforced Composite Beams Reinforced with Gypsum-Based Composites. [PDF]

open access: yesPolymers (Basel)
Glass Fiber-Reinforced Composite (GFRP) has found widespread use in engineering structures due to its lightweight construction, high strength, and design flexibility. However, pure GFRP beams exhibit weaknesses in terms of stiffness, stability, and local compressive strength, which compromise their bending properties.
Liu Y, Su B, Zhang T.
europepmc   +3 more sources

Gypsum-Based Composites with Recycled PP/HDPE Pellets for Circular Material Development: A Comprehensive Characterisation. [PDF]

open access: yesMaterials (Basel)
Managing plastic waste is a great challenge for today’s society, and it is increasingly necessary to find solutions to the large amount of plastic waste dumped annually in the oceans. The main objective of this research is to perform a comprehensive characterisation of different gypsum-based materials incorporating recycled PP/HDPE pellets from the ...
Ferrández D   +4 more
europepmc   +5 more sources

Development of Highly Water-Resistant Gypsum-Based Composites.

open access: yesJournal of the Society of Materials Science, Japan, 2002
Gypsum is widely used for the manufacture of various building materials because of its advantages such as rapid setting, good thermal insulating property and fire resistance, but their use is limited to interior finishings because of its poor water resistance.
KUMAGAI, Shinsuke, OHAMA, Yoshihiko
openaire   +2 more sources

Improvement of ternary gypsum-based composite resistance to a humid environment

open access: yesIOP Conference Series: Materials Science and Engineering, 2020
Abstract The paper describes the behavior of ternary gypsum-based composites, especially the changes of properties caused by the influence of moisture. The ternary gypsum-based mortar, composed of gypsum, hydrated lime, different types of pozzolan (silica fume, granular blast slag, and brick powder), and standard sand was investigated ...
D Dobias   +3 more
openaire   +1 more source

Mechanical and Microstructural Properties of Redispersible Polymer-Gypsum Composites [PDF]

open access: yesMaterials Research, 2019
Studies on gypsum modified by polymers have been conducted to assess the potential of improvement in the mechanical performance, water resistance and increasing the setting time, facilitating its handling.
Carlos Eduardo Marmorato Gomes   +4 more
doaj   +1 more source

Biodeterioration of Sustainable Hemp Shive Biocomposite Based on Gypsum and Phosphogypsum

open access: yesJournal of Natural Fibers, 2022
The present research investigated bio-based construction material based on hemp shives and gypsum. Low-density material was developed with densities of 200, 300, and 400 kg/m3. Simple yet robust production technology was used.
Girts Bumanis   +3 more
doaj   +1 more source

Mechanisms and mechanics of bonding in 3D printed materials systems based on traditional mould materials [PDF]

open access: yesSongklanakarin Journal of Science and Technology (SJST), 2022
Common material systems used for 3D printing of sand-casting moulds are often plaster-based sand compositions with typical limitations. Bentonite-based sand composites and associated binding mechanisms are well established in traditional foundry ...
Solaman B. Selvaraj, Sarat Singamneni
doaj   +1 more source

Effect of Fiber Loading on Mechanical and Flame-Retardant Properties of Poplar-Fiber-Reinforced Gypsum Composites

open access: yesMolecules
Gypsum-based composites were prepared via a slurry casting process using construction gypsum as the binding material and poplar fibers as reinforcing material.
Yunpeng Ye, Qinqin Huang, Xingong Li
doaj   +1 more source

Microstructure and mechanical properties of gypsum composites reinforced with recycled cellulose pulp

open access: yesMaterials Research, 2008
The use of waste fibers for the reinforcement of brittle matrices is considered opportune for the sustainable management of urban solid residues. This paper examines the microstructure and mechanical properties of a composite material made of gypsum ...
Magaly Araújo Carvalho   +4 more
doaj   +1 more source

Home - About - Disclaimer - Privacy