Results 61 to 70 of about 697,778 (299)

Uniform Amorphization of Crystalline Silicon Surfaces Enabled by Deep Ultraviolet Femtosecond Laser Pulses

open access: yesAdvanced Engineering Materials, EarlyView.
Deep‐UV (258 nm) femtosecond pulses enable uniform amorphous silicon writing on Si(100)/(111) with a six‐fold larger fluence amorphization window than NIR methods. Optimized fluence and overlap yield 20–45 nm uniform and continuous amorphous layers. Microscopy shows sharp interfaces, and real‐time reflectivity reveals nanosecond melt–resolidification ...
Wissal Benali   +5 more
wiley   +1 more source

Research on Radial Vibration Model and Low-Frequency Vibration Suppression Method in PMSM by Injecting Multiple Symmetric Harmonic Currents

open access: yesActuators
Driven by frequency conversion, the windings of a three-phase permanent magnet synchronous motor (PMSM) contain both odd and even harmonic currents.
Le Kang   +4 more
doaj   +1 more source

Harmonic clutter recognition and suppression for automotive radar sensors

open access: yesInternational Journal of Distributed Sensor Networks, 2017
In this article, we propose a novel harmonic clutter recognition and suppression method to overcome the deterioration of a target- or vehicle-detection performance due to harmonic clutters.
Jae-Eun Lee   +5 more
doaj   +1 more source

Suppression of higher harmonics at noise induced resonances

open access: yesPhysical Review E, 1995
We consider the generation of higher harmonics in periodically driven noisy nonlinear systems. Recent numerical studies of higher harmonics in such systems have shown so-called noise induced resonances that manifest themselves in a strong suppression of higher harmonics at certain values of the noise level.
Jung, Peter, Talkner, Peter
openaire   +4 more sources

A Wideband Filtering Antenna Array With Harmonic Suppression

open access: yesIEEE Transactions on Microwave Theory and Techniques, 2020
In this work, a wideband 2×2 filtering antenna array is proposed and studied for fixed beam applications. The device is composed of a patch antenna array and a slotline-based four-way filtering power divider served as the feeding network. The integration of the antenna and the feeding parts is not a simple combination but a co-synthesis, where the ...
Yi-Ming Zhang   +3 more
openaire   +1 more source

A phase compensated harmonic suppression method for virtual synchronous generator system in distorted grid.

open access: yes, 2022
Power quality issues are challenging to deal with by conventional harmonic suppression methods in a virtual synchronous generator-based system connected to the distorted grid.
Guerrero, Josep M.; id_orcid   +4 more
core   +1 more source

Rapidly Solidified High‐Strength Invar 36 Prepared by Planar‐Flow Melt Spinning

open access: yesAdvanced Engineering Materials, EarlyView.
The Invar 36 alloy was rapidly solidified using the planar‐flow melt‐spinning technique. Ribbon samples with thicknesses ranging from 20 to 160 mm were produced. As the grain size of the ribbon decreased to sub‐micron levels, the hardness increased by more than 2 times.
Bekir Akgül, Mehmet Kul
wiley   +1 more source

A 20–40 GHz Harmonic Rejection Enhanced Frequency Doubler in 150 nm GaAs p-HEMT

open access: yesIEEE Access
This paper presents a broadband monolithic microwave integrated circuit (MMIC) frequency doubler within a 20-40GHz frequency operation range in a $0.15\mu $ m GaAs p-HEMT process.
Fengyun Chen   +3 more
doaj   +1 more source

Characteristic Parameter Optimization of Wireless Flaw Sensing System Based on Active Interference Suppression Algorithm

open access: yesDiscrete Dynamics in Nature and Society, 2021
Based on the active interference suppression algorithm, this study combines the radar working mode and the interference type and realizes the effective detection of the flaw detection signal by successively processing the radar receiving signal and the ...
Wenping Wu
doaj   +1 more source

Materials‐Driven Additive Manufacturing for Electrical Machines: Qualification‐Oriented Design Beyond Geometric Freedom

open access: yesAdvanced Engineering Materials, EarlyView.
This perspective reframes additive manufacturing for electrical machines as a qualification‐limited materials and architecture design problem. It links process–structure–property–performance relationships to magnetic, conducting, dielectric, and thermal property windows, highlighting where AM can enable segmented magnetic circuits, permanent magnet ...
Dénes Fodor, Loránd Szabó
wiley   +1 more source

Home - About - Disclaimer - Privacy