Results 61 to 70 of about 85,615 (303)
Field-assisted sintering of low-temperature thermoelectric material BiTeSe - sintering process and part characterisation [PDF]
MATEC Web of ConferencesField-Assisted Sintering Technology (FAST), an advanced consolidation technique, was employed to synthesise low-temperature thermoelectric n-type Bi2Te2.7Se0.3 for energy harvesting applications.
Chen Bo +6 more
doaj +1 more source
Lithium conducting solid electrolyte Li1.3Al0.3Ti1.7(PO4)3 obtained via solution chemistry [PDF]
, 2013 NaSICON-type lithium conductor Li1.3Al0.3Ti1.7(PO4)3 (LATP) is synthesized with controlled grain size and composition using solution chemistry. After thermal treatment at 850 C, sub-micronic crystallized powders with high purity are obtained.
Ansart, Florence +9 more
core +3 more sources
Advanced Engineering Materials, EarlyView.Creep experiments at 900°C on coarse‐grained steel‐ceramic composites containing recycled magnesia reveal that higher ceramic volume fractions significantly enhance the creep resistance. Detailed EBSD investigations identify subgrain formation in the steel matrix as the dominant deformation mechanism.
Moritz Müller +6 more
wiley +1 more source
Journal of Materials Research and Technology, 2022 Robust bonding of Cu quasi-nanoparticles sintering for Ag coated chip and bare copper substrate was achieved. The effect of temperature, pressure and time on the sintering bonding strength and microstructural evolution was deeply studied.
Xu Liu +6 more
doaj +1 more source
Strongly connected ex-situ MgB2 polycrystalline bulks fabricated by solid-state self-sintering
, 2012 We have investigated the microstructure, normal-state electrical connectivity, and critical current density of ex-situ MgB2 polycrystalline bulks prepared by systematically varying the sintering conditions under low pressure.
Kishio, Kohji +4 more
core +1 more source
Handbook of Establishing and Maintaining Oxygen‐Free Atmospheres
Advanced Engineering Materials, EarlyView.This study presents a practical framework for creating oxygen‐free atmospheres at ambient pressure using silane‐doped inert gases. The results show that ultra‐low oxygen levels and strongly reduced water content can be achieved through controlled silane dosing, drying systems, and sensor monitoring.
Sascha Jan Zimmermann +3 more
wiley +1 more source
Recent Progress in Rapid Sintering of Nanosilver for Electronics Applications
Micromachines, 2018 Recently, nanosilver pastes have emerged as one of the most promising high temperature bonding materials for high frequency and high power applications, which provide an effective lead-free electronic packaging solution instead of high-lead and gold ...
Wei Liu +6 more
doaj +1 more source
Foaming Glass Using High Pressure Sintering [PDF]
, 2017 Foam glass is a high added value product which contributes to waste recycling and energy efficiency through heat insulation. The foaming can be initiated by a chemical or physical process. Chemical foaming with aid of a foaming agent is the dominant industrial process. Physical foaming has two variations.
Østergaard, Martin Bonderup +4 more
openaire
Advanced Engineering Materials, EarlyView.A hierarchical porous copper current collector is fabricated via three‐dimensional printing combined with pressureless sintering to stabilize lithium metal anodes. The interconnected architecture lowers local current density, guides uniform Li deposition within pores, and suppresses dendrite growth.
Alok Kumar Mishra, Mukul Shukla
wiley +1 more source
Materials Research, 2004 The work reported on here involved the development of several samples of "diamond-SiC" composite produced under sintering pressures of up to 9.0 GPa at temperatures of up to 1973 7K. The average size of the diamond micropowder crystals used was 40/28 µm.
Oleksandr Sergueevitch Osipov +2 more
doaj +1 more source