Results 141 to 150 of about 22,833 (261)
HIGH RISE BUILDING: perspective 1
, 2012 MIXED USE HIGH RISE BUILDING DESIGN COMBINING WIND TURBINE, IN ORDER TO FIND A SUSTAINABLE WAY TO USING CLEAN ...
Sun, Yanfang
core
Shaking Table Model Test of a High rise Building Structure
工程科学与技术, 2007 :A shaking table test of 1/15 scale model of a high rise building was carried out in the Shaking Table Division of State Key Laboratory for Disaster Reduction in Civil Engineering at Tongji University. The model’s dynamic characteristics and responses of
doaj
Advanced Engineering Materials, EarlyView.Predicting extreme defects in additive manufacturing remains a key challenge limiting its structural reliability. This study proposes a statistical framework that integrates Extreme Value Theory with advanced process indicators to explore defect–process relationships and improve the estimation of critical defect sizes. The approach provides a basis for
Muhammad Muteeb Butt +8 more
wiley +1 more source
, 2002 All the usual urban design concepts commonly planned horizontally in the ground plane for the good city and civic design must now be interpreted vertically for the skyscrapers.
Arangalla, W
core
Advanced Engineering Materials, EarlyView.The tribological behavior of 100Cr6 steel spheres textured via Vickers microindentation is evaluated under lubricated sliding by varying both dimple size and density. Fine and dense textures significantly reduce friction across all lubrication regimes, while large dimples increase it.
Farideh Davoodi +3 more
wiley +1 more source
HIGH RISE BUILDING: PLAN SECTION
, 2012 MIXED USE HIGH RISE BUILDING DESIGN COMBINING WIND TURBINE, IN ORDER TO FIND A SUSTAINABLE WAY TO USING CLEAN ...
Sun, Yanfang
core
Advanced Engineering Materials, EarlyView.This study presents a reversible temperature sensor with high switching ratio, ∼103. The device is fabricated using PET‐ITO and carbon nanotube dispersions in alkane. Considering its application in cold chain logistics, a proof‐of‐concept with LED is showcased. Thus, a temperature drop below the threshold temperature (crystallization temperature of the
Sunil Kumar Behera +8 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study explores the lightweight potential of laser additive‐manufactured NiTi triply periodic minimal surface sheet lattices. It systematically investigates the effects of relative density and unit cell size on surface quality, deformation recovery, compression behavior, and energy absorption.
Haoming Mo +3 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe +4 more
wiley +1 more source
Salāmat-i kār-i Īrān, 2014 Background and aims: Today, due to the increasing of urban population and hence land shortage, construction of tall buildings are rising . The potential risks of such projects arecomparatively more than the conventional construction as the construction ...
Abdollah Ardeshir +3 more
doaj