Results 101 to 110 of about 1,072,767 (226)

Modeling reflective cracking development in hot-mix asphalt overlays and quantification of control techniques [PDF]

open access: yes, 2010
Hot-mix asphalt (HMA) overlay is regarded as an efficient method to rehabilitate moderately deteriorated pavements. Despite the application of an adequately designed overlay, when HMA overlays are built on jointed concrete pavement (JCP) or a cracked ...
Baek, Jongeun
core  

Effect of foaming water dosage on mechanical properties of warm foamed asphalt mixture

open access: yesFrontiers in Materials
This study investigated the impact of foaming water consumption on the mechanical properties of foam warm mix matrix asphalt mixture (FWMAM) and foam warm mix SBS-modified asphalt mixture (FWMAM-SBS) through comparative analysis with conventional hot mix
Yan He   +5 more
doaj   +1 more source

Influence of High RAP Content with Different Types of Fillers on HMA Resistance for Moisture Damage for Different Layers

open access: yesمجلة النهرين للعلوم الهندسية
Hot mix asphalt embedded on "Reclaimed asphalt pavement"(RAP) has the advantages of high technology. Moisture damage is a concern in these mixtures at all service temperatures.
Zainab Malik, Alaa Hussen Abed
doaj   +1 more source

Hot Mix Asphalt for Intersections in Hot Climates [PDF]

open access: yes
Rutting of hot mix asphalt (HMA) pavement at or near intersections is very common both in cold and hot climates. Obviously, the problem is more acute in hot climates compared to cold climates because the stiffness of HMA decreases with increase in ...
Kandhal, Prithvi S.   +2 more
core  

Evaluating Rutting Resistance of Rejuvenated Recycled Hot-Mix Asphalt Mixtures Using Different Types of Recycling Agents. [PDF]

open access: yesMaterials (Basel), 2022
Hashim TM   +9 more
europepmc   +1 more source

Evaluation of bond strength between hot mix asphalt and stone mastic asphalt surfacing layer [PDF]

open access: yes, 2013
Poor bonding between asphalt layers cause many distresses, and the most typical problem is the slippage failure. This failure usually occurs when there are exists insufficient bond between the interfaces of the two layers in contact.
Velian, Vrida Ingrid
core  

Performance of sasobit modified asphalt binder in warm-mix asphalt technology [PDF]

open access: yes, 2014
Road maintenance is widely recognized, but not adequately maintained due to economic crisis of countries. Besides, increasing emission of greenhouse gases is an environmental issue, and it is a great concern to curb this problem from further harm to the ...
Feizabadi, Shahab Moeini
core  

Home - About - Disclaimer - Privacy