Results 11 to 20 of about 3,668,534 (225)
Mechanical Properties of Hybrid Fiber Reinforced Rubber Concrete [PDF]
Orthogonal experiments were designed for hybrid fiber rubber concrete (HFRC). The mechanical properties of HFRC were tested and compared with ordinary concrete. The effects of basalt fiber volume ratio (VBF), PVA fiber volume ratio (VPF) and rubber volume ratio (VR) on the compressive strength, splitting tensile strength and flexural strength of HFRC ...
Su, Qiang, Xu, Jin-Ming, Wang, Yong-Dong
openaire +2 more sources
Properties of steel-polypropilene hybrid fibers reinforced concrete
This paper present the results of mechanical properties of hybrid reinforced concrete made by adding polypropylene and steel fibers into concrete mixture. For the testing purposes were used steel fibers with hooked ends and monofilament polypropylene fibers.
Nenad Ristić +4 more
openaire +3 more sources
An Experimental Study on fiber Reinforced Hybrid Concrete
In this project modified hybrid concrete- a novel construction material is manufactured with fibers (steel fibers, polypropylene fibers) and silica fume by drilling through the cement and mortar in order to develop a high strength concrete. The main purpose is to develop a concrete with improved physical and mechanical properties.
Ganesan M, Divyasankari G
openaire +1 more source
A Review of Fiber Synergy in Hybrid Fiber Reinforced Concrete [PDF]
Abstract Fibre reinforced concrete (FRC) presently utilized as a part of special structures subjected to dynamic loads for example airport pavements, expressways overlays, bridge decks and machine foundations. In most cases, FRC contains just a single kind of fibre. The utilization of at least two kinds of fibres in an appropriate mix
Niraj Kumar Singh, Baboo Rai
openaire +1 more source
Mechanical Properties of PVA & Steel Hybrid Fiber Reinforced Concrete [PDF]
Combining various kinds of fibre to achieve good response and strength from the concrete by using different experiments is shown in this research. Here PVA which is polyvinyl alcohol and HS hooked end steel fibres are used to gain more strength compared with normal concrete or single fibre concrete.
Sai Sree K Sharmila, Koniki Srikanth
openaire +2 more sources
A New Design-Oriented Model of Glass Fiber-Reinforced Polymer-Reinforced Hollow Concrete Columns [PDF]
Hollow concrete columns (HCCs) reinforced with glass fiber-reinforced polymer (GFRP) bars and spirals are considered an effective design solution for bridge piers, electric poles, and ground piles because they use less material and maximize the strength ...
AlAjarmeh, OS +11 more
core +1 more source
Deflection behaviour of FRP reinforced concrete flexural members [PDF]
The design of fibre reinforced polymer (FRP) reinforced concrete (RC) can often be governed by the serviceability limit state of deflection. Currently, the evaluation of short-term deflection of FRP RC is undertaken using radically different approaches ...
Al-Sunna, Raed Akram Saliba
core +5 more sources
Statistical Modeling of Compressive Strength of Hybrid Fiber-Reinforced Concrete—HFRC [PDF]
The incorporation of reinforcements is a necessity to compensate for the deficiency that concrete presents with its fragile behavior and low deformation capacity.
Tutikian, Bernardo +7 more
core +1 more source
Improving the performance of concrete using 3D fibres [PDF]
This paper examines whether 3D fibre reinforcement can improve the toughness and flexural strength of concrete, when compared to equal dosage of straight steel fibres. This work was carried out to determine structural qualities that may lead to potential
Richardson, Alan, Heather, Marcus
core +1 more source
GFRP reinforced concrete : environmental and movement characteristics [PDF]
For the last few decades, research has been conducted in order to come over the problem of corrosion in steel reinforced concrete. Consequently, methods such as cathodic protection, epoxy coatings, concrete additives, etc., have been tried ...
Al-Salem, Sultan
core +6 more sources

