Results 281 to 290 of about 188,217 (357)
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT This study examined the degradation of Reactive Red 180 and safranin using zinc oxide photocatalysis. Complete dye removal was achieved for both dyes under optimal conditions within 2 h. For Reactive Red 180, the optimum conditions were pH 10, 0.5 g/L zinc oxide, 25 ppm dye concentration, and 1 L volume. For safranin, the conditions were pH 10,
Merve Kaya +5 more
wiley +1 more source
Ensiling and Fermentation of Rice Hulls With Ruminal Fluid for Medium‐Chain Carboxylate Production
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT Large quantities of rice hulls are common at milling sites in Nigeria. They are a by‐product of rice processing and can contribute to environmental degradation if not properly managed. In this study, rice hulls were pretreated by ensiling at ambient temperature and then used as substrate for medium‐chain carboxylates (MCCs) production ...
Jerome Undiandeye +3 more
wiley +1 more source
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT Addressing issues such as low heat transfer intensity, high system power consumption, and poor temperature uniformity in liquid cooling plates for lithium‐ion batteries (LIBs) in electric vehicles (EVs), a pin‐fin liquid cooling plate was designed to enhance comprehensive heat transfer performance.
Feifei Liu +5 more
wiley +1 more source
Experimental Investigation of Microbubble Evolution in the Liquivac Multiphase Flow Pump
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT This paper aims to experimentally investigate the mechanisms of microbubble characteristics evolution within an axial pump. The findings will aid in assessing the pump performance by identifying the range of bubble sizes and comparing them with the threshold size (< 300 μm). This study also provides evidence supporting the use of such pumps as
Hamad FA +4 more
wiley +1 more source
Swelling ability, volume of cracks and hydraulic conductivity of a polymer modified bentonite subjected to wet and dry cycles [PDF]
, 2016 De Camillis, Michela
core
Methane Generation Using an Anaerobic Biodigester From Waste Leachate Water
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT Leachate wastewater (LWW) is characterized by slow biodegradation and low biogas production due to resistant materials and limited biological activity. Therefore, applying pretreatments is essential to improving biodegradation potential, which consequently boosts energy recovery.
Khairi R. Kalash +5 more
wiley +1 more source
Numerical and Experimental Study of Mixing Characteristics in a Spiral Micromixer
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT Significant enhancement of mixing performance can be achieved by Dean vortices in spiral channels. In order to deeply explore the mixing mechanisms and variation laws in spiral micromixers, this work designed a spiral micromixer and adopted a combined method of experiments and numerical simulations to analyze the mixing performance and ...
Anming Yang, Shiqing Zheng
wiley +1 more source
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT Ag–Fe bimetallic nanoparticles (alloy and core–shell structures) were synthesized using Grewia optiva leaf extract through a green, phytochemical‐mediated approach. The effects of pH, temperature, extract concentration, and Ag:Fe molar ratio on nanoparticle formation were systematically optimized, enabling size‐controlled and morphologically ...
Sehrish Asad +6 more
wiley +1 more source
Journal of Applied Polymer Science, EarlyView.Influence of acrylonitrile (ACN) content on the processing behavior and morphological development of PA/NBR thermoplastic vulcanizates. Torque‐time profiles, SEM, and SEM/AFM images show that an intermediate ACN level (38%) promotes improved phase dispersion and morphological uniformity, especially with increased processing time, resulting in the most ...
André Luís dos Santos da Silva +4 more
wiley +1 more source