Results 81 to 90 of about 703,248 (356)
Advanced Engineering Materials, EarlyView.Equal channel angular pressing of commercial pure copper under low strain amplitude (≈0.48) induces concurrent continuous and localized discontinuous dynamic recrystallization, forming a duplex structure influenced by strain heterogeneity and recovery. Moderate hardening after 4–12 passes results from progressive high‐angle grain boundary formation via
Paula Cibely Alves Flausino +6 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.The dielectric elastomer‐based electropneumatic device (DE‐EPD) is a vacuum‐assisted ventricular assist device (VAD) that delivers high performance (85 mmHg, 6.8 L min−1) with low power consumption. Unlike traditional motor‐driven VADs, it is lightweight, quiet, energy‐efficient, and provides pulsatile flow. Validated in a simulated circulation system,
Amine Benouhiba +6 more
wiley +1 more source
Energies, 2022 In the present work, to investigate the hydraulic losses and safe operation of nozzle check valves in industrial piping systems, the static characteristics of the valve and its dynamic behavior in the pipeline system were studied using an experimental ...
Zhengbai Chang, Jin Jiang
doaj +1 more source
On the Unsteady, Dynamic Response of Phase Changes in Hydraulic Systems [PDF]
, 1979 This paper is concerned with the unsteady, dynamic behavior of hydraulic systems and, in particular, with the dynamic characteristics of internal flows involving phase-change and two-phase flows.
Brennen, Christopher
core
Wearable Haptic Feedback Interfaces for Augmenting Human Touch
Advanced Functional Materials, EarlyView.The wearable haptic feedback interfaces enhance user experience in gaming, social media, biomedical instrumentation, and robotics by generating tactile sensations. This review discusses and categorizes current haptic feedback interfaces into force, thermal, and electrotactile stimulation‐based haptic feedback interfaces, elucidating their current ...
Shubham Patel +3 more
wiley +1 more source
Electrochemical Lithium Extraction with Gas Flushing of Porous Electrodes
Nanomaterials, 2023 Electrochemical extraction of lithium from seawater/brine is receiving more and more attention because of its environment-friendly and energy-saving features.
Shengyao Wang, Xuyu Yu, Xuejiao Hu
doaj +1 more source
Hydraulic Actuator System for Rotor Control [PDF]
, 1991 In the last ten years, several different types of actuators were developed and fabricated for active control of rotors. A special hydraulic actuator system capable of generating high forces to rotating shafts via conventional bearings is addressed.
Althaus, Josef, Ulbrich, Heinz
core +1 more source
Assessment of RANS turbulence models and Zwart cavitation model empirical coefficients for the simulation of unsteady cloud cavitation [PDF]
, 2019 The numerical simulation of unsteady cavitation flows is sensitive to the selected models and associated parameters. Consequently, three Reynolds Average Navier-Stokes (RANS) turbulence models and the Zwart cavitation model were selected to assess their ...
Escaler Puigoriol, Francesc Xavier +1 more
core +2 more sources
Thermally Actuated Soft Robotics
Advanced Materials, EarlyView.This review focuses on the recent development of thermally actuated soft robotics, highlighting the four major heating mechanisms, as well as structural designs, thermal management, material innovations, and emerging applications. A summary and outlook section present the current challenges of thermally actuated soft robots and the future directions to
Shuang Wu +2 more
wiley +1 more source
Influence of the axial fan blade angle on the turbulent swirl flow characteristics [PDF]
Scientific Technical Review, 2014 The paper presents the investigation of the turbulent swirl flow in a pipe behind the axial fan with adjustable nine blades for the angles of 22°, 26° and 30° for the same rotation number (1500 rpm). Velocities were measured with laser Doppler anemometry
Čantrak Đorđe +3 more
doaj