Results 41 to 50 of about 894 (169)

An Overview of the Technological Progress in Propellants Using Hydroxyl-Terminated Polybutadiene as Binder During 2002–2012

Journal of Aerospace Technology and Management, 2013
http://dx.doi.org/10.5028/jatm.v5i3.242 The purpose of this article is to present a study on the technological development of propellants, which are used in solid and hybrid rocket motor, that have been employing hydroxyl-terminated polybutadiene (HTPB)
Gilson da Silva, Simone Carvalho Rufino, Koshun Iha   +2 more
doaj  

Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution

Macromolecular Materials and Engineering, Volume 311, Issue 7, July 2026.
ABSTRACT Additive manufacturing by fused deposition modelling (FDM) has expanded the use of engineering thermoplastics in environments where long‐term durability remains insufficiently characterized. In this work, the molecular and microstructural aging mechanisms of FDM‐printed polycarbonate (PC), acrylonitrile–butadiene–styrene (ABS) and high‐impact ...
Esperanza Díaz, Yolanda Merodio, Igor Puerto, José Manuel Zubeldia‐Reina, Xabier León   +4 more
wiley   +1 more source

Controllable Energy Release of Boron@Tannic Acid@Ammonium Perchlorate Energetic Microunits Governed by Cu Single Atoms

Rare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT Controllable energy release in solid propellants has always been a challenging technology, and extensive efforts have been devoted to the synthesis and application of catalysts to achieve its controllable release. In this study, tannic acid (TA) and its complexes (TA‐Cu) were introduced into boron@ammonium perchlorate (B@AP) composites using ...
Yong Kou, Ben Liu, Ronghuan Yang, Yongjun Gu, Xiaolong Fu, Qiangqiang Lu, Jiahao Yu, Jun Di, Guigao Liu, Lei Xiao, Fengqi Zhao, Wei Jiang, Gazi Hao   +12 more
wiley   +1 more source

Chemorheological Kinetic Modeling of Uncatalyzed Hydroxyl‐Terminated Polybutadiene and Isophorone Diisocyanate

Macromolecular Materials and Engineering
Catalysts are often employed to enable nonisothermal reaction kinetic studies when tracking cure progression of polyurethane reactions. However, when quickly reacting, catalyzed materials are prepared through mixing followed by the addition of fillers or
John P. Reynolds, Tiffany N. Thompson, Cailean Q. Pritchard, Michael D. Schulz, John J. La Scala, Michael J. Bortner   +5 more
doaj   +1 more source

Hydroxyl‐Terminated Polybutadiene‐Based Molding Powders as an Alternative Route for Manufacturing Pressed Polymer‐Bonded Explosives

Propellants, Explosives, Pyrotechnics, Volume 51, Issue 6, Page 955-965, June 2026.
This study presents an alternative method to manufacture polymer‐bonded explosives by partially curing an HTPB‐based molding powder prior to compaction. The study shows that the length of partial cure time before compaction directly influenced the geometric fidelity, homogeneity, compressive strength, density, and internal microstructure.
Ismar L. Chew, Cole Stephens, Ellen Ma, Julio Hernandez, Monique S. McClain   +4 more
wiley   +1 more source

Bio‐Based Polyurethanes: Mechanical Performance, Structure–Property Relationships, and Future Directions

Journal of Polymer Science, Volume 64, Issue 9, Page 1860-1894, 1 May 2026.
This review examines bio‐based polyurethanes from renewable feedstocks, focusing on structure‐property relationships governing mechanical performance. It analyzes reinforcement strategies, benchmarks against petrochemical counterparts, and explores future directions, including non‐isocyanate routes and circular economy integration for sustainable high ...
Khaled Chawraba, Hussein Medlej, Mohamad Sakr, Akram Hijazi, Abrar Hussain   +4 more
wiley   +1 more source

Assessment of the Interaction between Ammonium Dinitramide and Isocyanurate Bonding Agents for Application on Technologies of Composite Solid Propellants

Propellants, Explosives, Pyrotechnics, Volume 51, Issue 5, Page 724-732, May 2026.
This work investigates the interaction of two isocyanurate‐based bonding agents with ammonium dinitramide: triallyl isocyanurate and 1,3,5‐tris(2‐hydroxyethyl) isocyanurate, which contain alkene and hydroxyl functional groups in their side chains, respectively.
Jessica O. Silva, Josiane R. C. Silva, Kamila P. Cardoso, Milton F. Diniz, Márcio Y. Nagamachi, Luiz F. A. Ferrão   +5 more
wiley   +1 more source

Effect of hard segment content on the phase separation and properties of hydroxyl-terminated polybutadiene thermoplastic polyurethane

Polymer Testing
Thermoplastic polyurethane (TPU) possesses a distinctive microphase separation structure resulting from the thermodynamic incompatibility between its soft and hard segments.
Boxin Liu, Zhihao Niu, Zhanglei Wang, Yimin Wang, Hua Zou, Xiuying Zhao, Shikai Hu   +6 more
doaj   +1 more source

Effect of Various Alcohols and Reaction Time on the Properties of Hydroxyl Terminated Natural Rubber Synthesized via Oxidative Degradation

Chemical Engineering Transactions, 2017
The oxidative degradation of deproteinized natural rubber (DPNR) using cobalt bis(acetyl acetonate) in the presence of different alcohols and various reaction time; followed by reduction with sodium borohydride (NaBH4) for the synthesis of hydroxyl ...
N. Baharulrazi, S.H.C. Man, Z. Mohamad, H. Mohd Nor, W.K. Wan Ali   +4 more
doaj   +1 more source

Toward 4R Electronics: Liquid‐Metal‐Enabled Thin Film, and Field‐Effect Transistors for Sustainability and E‐Waste Reduction

Advanced Materials Technologies, Volume 11, Issue 7, 6 April 2026.
The 4R principle—Resilience, Repairability, Recyclability, and Renewability—enables sustainable liquid‐metal transistors. LM materials provide stretchable, damage‐tolerant architectures, allow rapid circuit repair, permit full material recovery through dissolution, and support renewable fabrication cycles, forming a closed‐loop pathway toward ...
Elahe Parvini, Abdollah Hajalilou
wiley   +1 more source