Results 11 to 20 of about 353 (208)
Plastic Response and Failure of the Cruciform Structure under In-Plane Load
Journal of Marine Science and Engineering, 2023 In this study, a common cruciform structure in ship hulls was designed and experimented with in order to analyze its deformation characteristics under planar collision and quasi-static loading.
Xiufei Wang +3 more
doaj +1 more source
The study of road pavement performance through impact hammer tests
International Conference “Environmental Engineering”, 2020 Noise pollution has become an important issue. One of the main sources of noise in residential areas is represented by transportation and by the interaction between tyre and road surface. Several studies illustrate that traffic noise is affected by road properties such as acoustic absorption, surface texture, and mechanical impedance.
Pratico, Filippo Giammaria +2 more
openaire +3 more sources
Applied Sciences, 2020 The natural frequencies and eigenmodes of the tensegrity simplex are determined experimentally in impact hammer tests. To study an effect of prestressing, the tests are carried out on a physical model 1.2 m high and 0.5 m diameter with build-in ...
Leszek Małyszko, Andrzej Rutkiewicz
doaj +1 more source
Hammer impact test applied for fouling detection in pipelines [PDF]
Sba: Controle & Automação Sociedade Brasileira de Automatica, 2011 The fouling detection in duct systems is a persistent problem and remains a relevant demand for the chemical, oil, food and pharmaceutical industries. The fouling is a deposition process of heavy organic and other dissolved solid materials in the transported fluids or suspensions onto inner wall surfaces in fluid transport systems.
Silva, Jaidilson Jó da +3 more
openaire +3 more sources
Experimental investigation of torsional vibration isolation using Magneto Rheological Elastomer
MATEC Web of Conferences, 2018 Rotating systems suffer from lateral and torsional vibrations which have detrimental effect on the roto-dynamic performance. Many available technologies such as vibration isolators and vibration absorbers deal with the torsional vibrations to a certain ...
Praveen Shenoy K +3 more
doaj +2 more sources
Simulation Methods for MEMS S&A Devices for 2D Fuze Overload Loading
Micromachines, 2023 An experimental testing system for the two-dimensional (2D) fuze overload loading process was designed to address the loading issues of recoil overload and centrifugal overload in fuze safety and arming (S&A) device.
Zhibo Wu +5 more
doaj +1 more source
Experiment and Simulation Study on the Dynamic Response of RC Slab under Impact Loading
Shock and Vibration, 2021 Reinforced concrete (RC) slab is an important component in civil construction and protection engineering, and its dynamic response under impact loading is a complex mechanical problem, especially for two or multiple continuous impact loads. In this paper,
Yue Wang +4 more
doaj +1 more source
On an Impact Testing Machine of Drop Hammer Type
journal of the Japan Society for Testing Materials, 1961 In order to research on the behaviors of destruction of carbon steel forgings by impact bending, we designed an impact testing machine of drop hammer type. The total height of this testing machine is about 5m. The weights of the used drop hammers are 12.5, 25 and 50kg respectively. The maximum distance from the position of test piece to the drop hammer
INADA, Sadatoshi +2 more
openaire +2 more sources
Rayleigh damping parameters estimation using hammer impact tests
Mechanical Systems and Signal Processing, 2020 Abstract Structural Health Monitoring (SHM) systems for aerospace applications are becoming more prevalent and its potential cost-benefit relation is rapidly improving as more structures that were traditionally made with metallic materials are gradually being replaced by composites.
Sánchez Iglesias, Fernando +1 more
openaire +2 more sources
Advances in Mechanical Engineering, 2021 In the present study, based on the previous impact resistance test study results regarding stainless steel reinforced concrete beams, six steel fiber stainless-steel reinforced concrete (SFSRC) beams were subjected to drop-hammer impact tests using an ...
Xiwu Zhou, Wen Zhang, Xiangyu Wang
doaj +1 more source