Results 21 to 30 of about 202 (106)

Tailoring Laser Powder Bed Fusion and Post‐Processing Parameters for JIS SKD61 Tool Steels: Surface Roughness, Microstructure, and Mechanical Properties

steel research international, EarlyView.
Laser powder bed fusion of JIS SKD61 tool steel is systematically optimized using a Taguchi design and ANOVA. Hatch spacing and layer thickness are identified as dominant parameters controlling surface roughness and tensile strength. Subsequent tempering at 600°C improves microstructural stability and mechanical performance, enabling high‐density SKD61
Masrurotin Masrurotin, Andi Ard Maidhah, Maziar Ramezani, Wojciech Macek, Cho‐Pei Jiang   +4 more
wiley   +1 more source

Study of the Thermal and Hydrothermal Aging Effects on the Properties of 3D‐Printed Thermoplastic Polyurethane

Journal of Vinyl and Additive Technology, EarlyView.
Effect of post‐aging conditions on mechanical and thermal properties of FDM‐printed parts. ABSTRACT In this study, the thermal and hydrothermal aging of TPU produced with the FDM technique was simulated and subjected to a series of tests. The alterations in the internal structures of the samples that had been subjected to tensile, hardness, adhesive ...
Busra Eyri, Okan Gul, N. Gamze Karsli, Taner Yilmaz   +3 more
wiley   +1 more source

Substitution of Ti by Nb in Maraging Steel: Effects on Strengthening Mechanisms and Crystallographic Behavior

steel research international, Volume 97, Issue 5, Page 2672-2692, May 2026.
This work demonstrates that replacing Ti with Nb in maraging steel forms nanoscale Nb–Mo particles along boundaries, strengthening the alloy without relying on Ti phases. Heat‐treatment tuning promotes uniform crystal orientation and balanced grain boundaries, enabling strong yet ductile behavior.
Mohamad Masoumi, Manoel José, Gerardo Jesus Aracena Pérez, Isabel Ferreira Barros, Marcos Natan da Silva Lima, Geronimo Perez, Samuel Lucas Santos Medeiros, Pedro Henrique Pinheiro Lima, Luís Flávio Gaspar Herculano, Maria Vittoria Moraschini Reis, Sérgio Souto Maior Tavares, Farina Alexandre Bellegard, Fridman Daniel Pallos, Miloslav Béreš, Hamilton Ferreira Gomes de Abreu   +14 more
wiley   +1 more source

Static Assessment of Hybrid Double‐Lap Bolted Joints With Additively Manufactured 316L Plates

Fatigue &Fracture of Engineering Materials &Structures, Volume 49, Issue 5, Page 1721-1741, May 2026.
ABSTRACT The present study examines the static response and evaluates the accuracy of design standards and selected literature‐based design criteria in estimating the load capacity of the inner plates of double‐lap shear bolted connections in single‐ and double‐bolt configurations.
Hasan Almuhanna, Giacomo Torelli, Luca Susmel   +2 more
wiley   +1 more source

Laser‐Welded Cellulose‐Carbon Nanotube Nanocomposites as a 3D Scaffold of Si Anodes for High‐Performance Lithium‐Ion Batteries

Advanced Functional Materials, Volume 36, Issue 31, 16 April 2026.
A Si anode comprising entangled networks of cellulose and SWCNT (C‐CNT) nanocomposites as an anode electrode for a high‐performance LIB is realized by fully utilizing the generated microstructure of a novel conductive 3D scaffold via a low‐temperature and eco‐friendly process. Additionally, localized heating via photo‐thermal conversion can be utilized
Boeun Ryu, Younghoon Jung, Hojin Son, Min‐Young Kim, Jinsub Lim, Changhun Yun   +5 more
wiley   +1 more source

Lattice Structures for Bone Replacement: The Intersection of Bone Biomechanics, Lattice Design, and Additive Manufacturing

Advanced Materials Technologies, Volume 11, Issue 7, 6 April 2026.
This review outlines how understanding bone's biology, hierarchical architecture, and mechanical anisotropy informs the design of lattice structures that replicate bone morphology and mechanical behavior. Additive manufacturing enables the fabrication of orthopedic implants that incorporate such structures using a range of engineering materials ...
Stylianos Kechagias, Maxwell J. Munford, Frederik C.H. Masure, Richard J. van Arkel, Reece N Oosterbeek   +4 more
wiley   +1 more source

The Effect of Post‐Processing in the Form of Ion Etching in Ar and O Applied to Metallic 3D Prints Produced Using the DMP Method on Their Cleaning Efficiency and Biological Response

Journal of Biomedical Materials Research Part B: Applied Biomaterials, Volume 114, Issue 4, April 2026.
ABSTRACT Direct Metal Printing (DMP) three‐dimensional (3D) printing technology, also known as direct laser sintering of metal powders, enables the production of metal components with complex geometries that are not achievable with traditional casting methods or subtractive techniques.
Dorota Bociaga, Jacek Grabarczyk, Piotr Niedzielski, Bartłomiej Januszewicz, Michał Bogdański, Ireneusz Kotela, Urszula Borowska‐ Skarzyńska   +6 more
wiley   +1 more source

Ultrasonic Welding of Garnet Solid Electrolytes to Lithium Metal: Achieving Intimate Interfacial Contact in Seconds

Small Structures, Volume 7, Issue 3, March 2026.
Cross‐sectional Li–LLZO interfacial morphologies obtained by ultrasonic welding in seconds at room temperature. Solid‐state batteries (SSBs) are widely regarded as promising next‐generation energy storage technology due to their potential for enhanced safety and higher energy density compared to conventional Li‐ion batteries.
Mikihisa Fukuda, Ying Li, Run‐Zi Wang, Shin‐ichi Orimo, Yutaka S. Sato, Hidemi Kato, Eric Jianfeng Cheng   +6 more
wiley   +1 more source

Exploring Microstructure–Physical Property–Corrosion Response Relationship in Intermetallic Compounds of Al‐Cu Bimetallic Interfaces

Advanced Engineering Materials, Volume 28, Issue 3, 4 February 2026.
Al‐Cu intermetallic compounds (IMCs) have a significant influence on the properties of Al‐Cu bimetallic interfaces formed in compound casting. This article provides a deeper understanding of microstructure, crystallography, thermal properties, hardness, and corrosion response of Al‐Cu IMCs with the goal of facilitating the optimization of the ...
Alireza Nazarahari, Tatiana Blank, Christian Hinte, Huseyin Can Ozdemir, Khemais Barienti, Christian Klose, Dermican Canadinc, Hans Jürgen Maier   +7 more
wiley   +1 more source

The Microstructure Evolution and Mechanical Properties of Rotary Friction Welded Duplex Stainless Steel Pipe. [PDF]

Materials (Basel), 2023
Zhang S, Xie F, Wu X, Luo J, Li W, Yan X.   +5 more
europepmc   +1 more source