Macromolecular Symposia, EarlyView.ABSTRACT This paper presents theoretical aspects and experimental tests for the design and optimization of a novel ducted fan propulsion system, complemented by multi‐element wings inspired by Handley Page and the aerodynamic Channel Wing concept.
Adrian Niță +4 more
wiley +1 more source
Machine Learning-Driven Prediction of Manufacturing Parameters and Analysis of Mechanical Properties of PC-ABS Specimens Produced by the Fused Deposition Modeling Additive Manufacturing Method. [PDF]
Polymers (Basel)Pazarcıkcı A, Özsoy K, Aksoy B.
europepmc +1 more source
Evaluation of the Shock Absorption Capacity of Polymeric Specimens Manufactured by 3D Printing
Macromolecular Symposia, EarlyView.ABSTRACT In the current context, due to the accelerated development of additive manufacturing, parts made of polymeric materials such as polylactic acid (PLA) manufactured by 3D printing are increasingly used. Such applications can be used, for example, in situations involving dynamic loads, where the shock energy absorption properties are essential ...
Alexandra‐Anamaria Spiridon +5 more
wiley +1 more source
Reinforcement of Novel PLA/17-4 PH Stainless Steel Hybrid Structures Fabricated by FDM: The Effects of Layer Configuration, Infill Density and Pattern. [PDF]
Polymers (Basel)Ötüken R +3 more
europepmc +1 more source
FDM 3D Printed Automotive Spoilers: A Simplified Cost Analysis
Macromolecular Symposia, EarlyView.ABSTRACT Additive manufacturing (AM) has become an attractive alternative for producing customized and low‐volume automotive components, particularly in the aftermarket sector. This study presents a simplified theoretical cost analysis for manufacturing an automotive rear spoiler using fused deposition modeling (FDM).
Florin ‐ Ștefan JINGA, Irina SEVERIN
wiley +1 more source
Tribomechanical Behaviour and Elasto-Plastic Contact Response of 3D-Printed Versus Conventional Polymer Inserts in Robotic Gripping Interfaces. [PDF]
Polymers (Basel)Păduraru GI +4 more
europepmc +1 more source
Investigation of the Critical Overhang Angle in Fused Filament Fabrication Technology
Macromolecular Symposia, EarlyView.ABSTRACT In fused filament fabrication, overhangs are challenging because each deposited layer requires partial support from the previous layer. The frequently cited 45° guideline for unsupported printing originates from empirical practice and does not consistently represent process‐specific behavior.
Nicolae Razvan Mititelu +4 more
wiley +1 more source
Influence of Architected Core Topology on the Dynamic and Flexural Behaviour of Multi-Material Sandwich Structures. [PDF]
Polymers (Basel)Doğanay Katı H, Khan M.
europepmc +1 more source
Near Surface Geophysics, EarlyView.Abstract Electrical resistivity tomography (ERT) has been shown to be effective for surveying and monitoring dams, due to the method's sensitivity to moisture content and relevant physical properties (e.g., porosity). Automated ERT systems, capable of time‐lapse monitoring, can be used to detect variations in ground conditions.
John S. Ball +4 more
wiley +1 more source
Polymer Composites, EarlyView.FDM‐printed polyamide composites and post‐processing by annealing. ABSTRACT In this study, composite filaments with a short carbon fiber (CF) reinforced polyamide 612 (PA612) were produced using the FDM method at three different raster angles (0°, ±45°, 90°).
Busra Eyri +3 more
wiley +1 more source