Results 1 to 10 of about 38,247 (200)
Rekayasa Mesin, 2021 To optimize the 3D printing process, the influence of its parameters on the performance of the printing process needs to be investigated. This research investigates the effect of infill pattern, infill density, and infill angle on the printing time and ...
Jaya Suteja
doaj +4 more sources
Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products. [PDF]
Materials (Basel), 2023 Three-dimensional printing is widely used in many fields, including engineering, architecture and even medical purposes. The focus of the study is to obtain the ideal weight-to-performance ratio for making a 3D-printed part. The end products of the 3D-printed part are hugely affected by not only the material but also the printing parameters.
Mazlan MA +3 more
europepmc +3 more sources
Effect of the Infill Density on 3D-Printed Geometrically Graded Impact Attenuators. [PDF]
Polymers (Basel)Three-dimensional printing is widely becoming prevalent in various industries, including the automotive sector. As this technology advances, critical structures subjected to impact loads may also be produced using additive manufacturing. A key parameter in this technique is the infill density of the printed geometry, which directly affects mechanical ...
Dos Reis MQ +3 more
europepmc +3 more sources
Incertitudes et Fiabilité des Systèmes MultiphysiquesFused Deposition Modeling (FDM) process is widely used for various applications as it offers many benefits. Mechanical properties of parts manufactured using FDM technique are very critical.
Abdellah El omari +2 more
doaj +2 more sources
Characterization of 3D printed re-entrant midsole structure with various infill density and print direction [PDF]
Scientific ReportsThis study focused on manufacturing 3D printed conductive re-entrant (RE) midsoles with two slicing directions (horizontal and vertical) and three infill densities.
Imjoo Jung, Sunhee Lee
doaj +2 more sources
Study on CNT/TPU cube under the 3D printing conditions of infill patterns and density
Scientific Reports, 2023 In this study, to develop soft pressure sensor applicable to wearable robots using stretchable polymers and conductive fillers, 3.25 wt% carbon nanotubes/thermoplastic polyurethane filament with shore 94 A were manufactured.
Imjoo Jung, Eun Joo Shin, Sunhee Lee
doaj +3 more sources
Significance of Infill Density on Mechanical Performance in Fused Deposition Modeling [PDF]
MATEC Web of ConferencesFused deposition modeling (FDM) is a widely employed additive manufacturing (AM) technique owing to its affordability and availability of equipment and materials.
Umer Muhammad Haseem +7 more
doaj +2 more sources
Exploring the Nonlinear Mechanical Characteristics of 3D-Printed ABS with Varying Infill Densities
Journal of Manufacturing and Materials ProcessingThis study investigates the mechanical behavior of ASTM D638-02a standard uniaxial tensile test specimens fabricated from 3D-printed acrylonitrile butadiene styrene (ABS) using fused deposition modeling (FDM) with a grid infill pattern at varying ...
Md Zisanul Haque Bhuiyan +1 more
doaj +2 more sources
The Efficiency of Manufacturing 3D Printed Part by Using Resin Polymer [PDF]
E3S Web of Conferences, 2023 The strength of 3D printed part is an important factor that must be considered before carrying out a product design. Moreover, manufacturing speed was also as key of successfully product design. The main focus of this study was to analyze the strength of
Bintara Redyarsa Dharma +6 more
doaj +1 more source
Delivering medium-density infill development through promoting the benefits and limiting background infill [PDF]
Journal of Urban Design, 2020 Australian cities rarely meet their targets for infill development and experience a ‘missing middle’ in terms of urban density.
Julian Bolleter, Zoe Myers, Paula Hooper
openaire +1 more source