Results 301 to 310 of about 36,647 (336)

Experimental Research of Remaining Oil Distribution for Inverted Nine-Sport Pattern and Infill Well Pattern

Arabian Journal for Science and Engineering, 2021
The remaining oil distribution in heavy oil reservoir with the unconsolidated sandstone before and after infilling of the inverted nine-spot well pattern was complicated. To better understand the variation of flow field and remaining oil distribution of inverted nine-sport pattern and infill well pattern, the physical experiments were examined using a ...
Hongguang Xu, Lushan Wang, Yanbin Cao, Tiantian Yu, Hanlin Tang, Jisheng Lin   +5 more
openaire   +1 more source

Impact of Infill Pattern on 3D Printed Dielectric Resonator Antennas

2018 IEEE Asia-Pacific Conference on Antennas and Propagation (APCAP), 2018
This paper studies the impact of different infill patterns on 3D printed dielectric resonator antennas (DRAs). Different infill patterns with the same infill percentage setting can have very different actual material infill percentages, which can result in a variation in the effective relative permittivity.
Jin Huang, Shengjian Jammy Chen, Zhenghui Xue, Withawat Withayachumnankul, Christophe Fumeaux   +4 more
openaire   +1 more source

Spatial and temporal patterns of sedimentation in an infilling reservoir

CATENA, 2019
Abstract River dams are ubiquitous globally, altering the connection of up- and downstream environments. In particular, they store vast amounts of sediment in their upstream reservoirs, many of which are approaching storage capacity. There is much interest in sediment management for these systems, even though quantifying sedimentation rates remains ...
Cindy M. Palinkas, Emily Russ
openaire   +1 more source

Exploring Infill Patterns on Varying Infill Densities on Dielectric Properties of 3D Printed Slabs

2023 Antenna Measurement Techniques Association Symposium (AMTA), 2023
Bibek Kattel, Winn Elliott Hutchcraft, Richard K. Gordon   +2 more
openaire   +1 more source

Effect of infill density and infill pattern on the mechanical properties of 3D printed PLA parts

Materials Today: Proceedings, 2022
Shivani Sriya Ambati, Ravindra Ambatipudi   +1 more
openaire   +1 more source

Investigation on impact strength of 3D printed PLA: effect of part orientation, infill pattern and infill percentage

International Journal of Manufacturing Technology and Management, 2023
Harshit K. Dave, Naushil H. Patadiya, Shilpesh R. Rajpurohit, Ashish R. Prajapati, Harit K. Raval   +4 more
openaire   +1 more source

Integrative oncology: Addressing the global challenges of cancer prevention and treatment

Ca-A Cancer Journal for Clinicians, 2022
Jun J Mao,, Msce, Lorenzo Cohen, Karen M Mustian   +2 more
exaly  

Influence of Infill Pattern on Reactive MgO Printed Structures

2022
AlaEddin Douba, Palash Badjatya, Shiho Kawashima   +2 more
openaire   +1 more source

Crack patterns in masonry infilled RC frames under horizontal loading

1997
An attempt is made to determine the equilibrium state attained in masonry-infilled RC frames subjected to in-plane shear forces once the material’s tensile strength has been overcome. The non-linear equilibrium problem is solved by making use of a simple mechanical model and resorting to the principle of stationary total potential energy.
BARSOTTI, RICCARDO, LIGARO', SALVATORE SERGIO, Royer Carfagni G.   +2 more
openaire   +1 more source

Effect of infill pattern and infill density on mechanical behaviour of FDM 3D printed Parts- a current review

Materials Today: Proceedings, 2022
Md. Qamar Tanveer, Gautam Mishra, Siddharth Mishra, Rohan Sharma   +3 more
openaire   +1 more source