Results 111 to 120 of about 975,679 (231)

Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball‐On‐Disk Wear of Additively Manufactured Polylactic Acid Composites

Polymer Composites, EarlyView.
Thermal Aging and Tribological Tests of Additive Manufactured PLA Composites. ABSTRACT This study focuses on the additive manufacturing of pure polylactic acid (PLA) specimens and milled glass fiber (GF)‐filled PLA composites under thermal cycling aging and wear tests. Wear tracks have been analyzed via 3D optical profiling and SEM imaging.
Sinan Fidan, Satılmış Ürgün, Nevin Gamze Karsli, Taner Yilmaz, Mustafa Özgür Bora, Mehmet İskender Özsoy   +5 more
wiley   +1 more source

Mechanical and Impact Response of Adhesively Bonded ASA/PA12 Sandwich Structures Produced by Fused Filament Fabrication

Polymer Engineering &Science, EarlyView.
Adhesively bonded ASA/PA12 FFF sandwich structures reveal that interfacial compliance governs mechanical performance. Cyanoacrylate enhances strength but induces brittle failure, while polyurethane improves ductility and impact resistance, demonstrating that adhesive properties and stacking sequence are critical design parameters for optimizing multi ...
Berkay Ergene, Bayram Yildiz, Tolgahan Ermergen, Çağın Bolat   +3 more
wiley   +1 more source

Solids Conveying in Injection Molding Machines—Analytical Model for Smooth and Grooved Feed Sections Derived From DEM Simulations

Polymer Engineering &Science, EarlyView.
Understanding Solids Conveying in Injection Molding Machines – Dimensions. ABSTRACT Solids conveying is a key aspect for the design of polymer processing machines, especially for processes with high screw speeds, grooved feed sections, and material with low bulk density.
Jan Landgraeber, Volker Schoeppner, Dennis Kleinschmidt, Dominik Jonek, Nils Grieger   +4 more
wiley   +1 more source

Effects of Annealing on the Thermomechanical Properties and Crystallization Behavior of FDM‐Printed High‐Temperature PLA and Glass Fiber PLA Composites

Polymer Engineering &Science, EarlyView.
Overview of the study evaluating the impact of post‐print annealing on the microstructural crystallization and thermomechanical properties of FDM‐printed high‐temperature PLA and glass fiber‐reinforced PLA composites. ABSTRACT Polylactic acid (PLA) combines renewable sourcing and reliable printability with limited stiffness retention near its glass ...
Huseyin Erdem Yalkin, Ayse Nur Ozkan
wiley   +1 more source

Cracking Behavior of Ceramsite Aerated Concrete Block Infill Wall in the Coastal Areas

International Journal of Concrete Structures and Materials
Ceramsite aerated concrete blocks (CACB) are widely used in reinforced concrete frame infill walls due to their green, energy-saving, waste utilization, and thermal insulation characteristics.
Ruige Li, Huadong Cui, Lingchao Ding, Haiping Ni, Shangquan Xu, Huiling Wu   +5 more
doaj   +1 more source

Innovative Seismic Strengthening of Reinforced Concrete Frames with U-Shaped Precast Concrete Wall Panels: Experimental Performance Assessment

Buildings
Many existing reinforced concrete (RC) frames with brick infill walls are vulnerable to earthquake damage, particularly when the walls contain window openings that reduce the lateral resistance.
Sookyoung Ha
doaj   +1 more source

Current Trends and Future Prospects of Integrating Electrospinning With 3D Printing Techniques for Mimicking Bone Extracellular Matrix Scaffolds

Journal of Polymer Science, Volume 63, Issue 6, Page 1481-1504, 15 March 2025.
ABSTRACT This article presents a review of the recent findings on the combination of electrospun nanofibers and three‐dimensional (3D)‐printed structures for extracellular matrix (ECM) scaffolds for bone tissue engineering. We explore the synergy between electrospinning (ES), which produces highly porous, fibrous structures from materials like collagen
Kardo Khalid Abdullah, Kolos Molnár
wiley   +1 more source

Multi‐scale flow analysis for scale‐aware urban canopy models

Quarterly Journal of the Royal Meteorological Society, EarlyView.
We found that scale‐aware models are necessary when numerical weather prediction models approach hectometric resolution, which is associated with a characteristic length‐scale of morphological heterogeneity. This morphology‐dependent length‐scale indicates that resolved and unresolved heterogeneity are equally important.
Jingzi Huang, Maarten van Reeuwijk
wiley   +1 more source

Seismic Performance Data for Infill Walls in Shear-Wall Buildings

The purpose of this study is to examine the seismic performance of infill walls made of various materials on a shear-wall building's exterior walls (inside walls are not included).
Qureshi, Atique
core   +1 more source

From Plot to Block: Participatory Land Use for Climate‐Resilient Detached Housing in Finland

Sustainable Development, EarlyView.
ABSTRACT This study investigates how urban planning in Finland is adapting to climate change, focusing on the practical challenges planners face in single‐family housing areas. It draws on participatory workshops with municipal planners in Pori and Joensuu, where three planning tools—green factor metrics, impermeable surface limits, and the 3–30‐300 ...
Hossam Hewidy
wiley   +1 more source