Results 31 to 40 of about 8,268 (215)
Seismic performance of four-storey masonry infilled reinforced concrete frame building
MATEC Web of Conferences, 2018 Masonry infilled reinforced concrete frames are a structural system commonly used for low-to-mid-rise buildings. Generally, this type of structure is modelled as an open frame neglecting the strength and stiffness contribution of the masonry infilled ...
Ratna Hapsari Isyana +2 more
doaj +1 more source
Finite-discrete element modelling of masonry infill walls subjected to out-of-plane loads [PDF]
, 2016 In this paper, the out-of-plane response of infill walls is investigated by means of non-linear monotonic (push-over) analyses through a combined finite and discrete modelling approach.
AL SHAWA, Omar +4 more
core +2 more sources
Study on Seismic Performance of RC Frame Structures Considering the Effect of Infilled Walls
BuildingsThis paper studies the impact of half-height infilled walls on the failure modes of frame columns through quasi-static tests of both frame models and half-height infilled wall frame models.
Xuetan Zhang +4 more
doaj +1 more source
Finite Element Micro-Modeling of Infilled Frames
Electronic Journal of Structural Engineering, 2008 In this paper, a realistic criterion is proposed to describe the frame-infill separation, in order to better simulate the complicated behavior of infilled frames under lateral loads.
P.G. Asteris
doaj +1 more source
Seismic Performance Target and Fragility of Masonry Infilled RC Frames under In-Plane Loading
Buildings, 2022 Masonry infilled RC frames are one of the most common structural forms, the damage of which, in earthquake events, usually cause serious losses. The determination of the seismic performance target is the key foundation of performance-based seismic ...
Chunhui Liu +4 more
doaj +1 more source
Masonry infilled frames – contemporary structural concepts
, 2021 Infilled frames were the focus of numerous experimental tests which have been executed to investigate the seismic behaviour of these systems, but the task remains challenging due to significantly pronounced nonlinear structural behaviour. The infill inevitably changes the “common” and well-known structural behaviour of bare steel and RC frames into a ...
Radić, Ivan +3 more
openaire +3 more sources
Strengthening of RC Frames With Infill Walls Using High Strength Lightweight Concrete Panels
Journal of Sustainable Construction Materials and Technologies, 2023 This study proposed a practical seismic retrofit method for RC frames. For this purpose, a quasi-static loading was applied to 8 RC frames in finite element analysis software, Abaqus, and frames were pushed 45 mm laterally. High-strength fiber-reinforced
Hakan Koman
doaj +1 more source
Influence of Infill Wall Configuration on Failure Modes of RC Frames
Shock and Vibration, 2018 An improper configuration of masonry infill walls in RC frame may lead to short column effect on the columns, which is harmful to the seismic behavior of the structure.
Xiaojie Zhou +3 more
doaj +1 more source
Buildings, 2022 This paper presents a mechanism and method for simulating the axial–shear–bending interaction of a reinforced concrete (RC) column. The three-dimensional model of a multi-story infilled RC frame was modeled using the OpenSees software.
Linjie Huang +6 more
doaj +1 more source
Experimental assessment and retrofit of full-scale models of existing RC frames [PDF]
, 2002 PSD tests on two full-scale models of existing non-seismic resisting RC frame structures are described. The testing program covered several aspects, namely assessment of seismic performance of existing frames without and with infill panels ...
Molina, J., Pinto, A. V., Varum, H.
core +1 more source