Results 71 to 80 of about 1,797,053 (297)
Advanced Engineering Materials, EarlyView.A numerical–experimental framework is developed for characterizing multi‐matrix fiber‐reinforced polymers (MM‐FRPs) combining epoxy and polyurethane matrices. Harmonic bending tests are integrated with finite element model updating (FEMU) to simultaneously identify elastic and viscoelastic material parameters.
Rodrigo M. Dartora +4 more
wiley +1 more source
Fracture analysis of debonding mechanism for FRP plates [PDF]
, 2009 Inevitable flaws in the concrete-FRP interface govern plate debonding, and are not amenable to finite element analysis because the models require far more detail than will ever be available for the interface. This thesis describes a global-energy-balance
Achintha, Paththini Marakkala Mithila
core +3 more sources
Advanced Engineering Materials, EarlyView.This study examines how helicoidal architectures with different porosities respond to bending. Adjusting layer angle and spacing in 3D‐printed polymers reveals clear tradeoffs between stiffness, strength, and energy absorption. Experiments and simulations highlight designs that distribute stress effectively, offering pathways for optimizing lightweight
Praveenkumar Subhash Patil +2 more
wiley +1 more source
Improve the Efficiency of Surgery for Femoral Shaft Fractures with A Novel Instrument: A Randomized Controlled Trial. [PDF]
PLoS ONE, 2016 To improve the efficacy of closed reduction and wire guiding during intramedullary nail internal fixation in femoral shaft fractures.A novel instrument was designed and manufactured. Sixty-eight patients were enrolled from February 2011 to December 2013.
Haitao Xu +6 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati +11 more
wiley +1 more source
Intraradicular Splinting with Endodontic Instrument of Horizontal Root Fracture
Case Reports in Dentistry, 2015 Introduction. Root fractures, defined as fractures involving dentine, cementum, and pulpal and supportive tissues, constitute only 0.5–7% of all dental injuries.
Ersan Çiçek +2 more
doaj +1 more source
Impact of MgO Additions on the Oxidation Resistance and Compression Behavior of Vanadium Alloys
Advanced Engineering Materials, EarlyView.An increase in oxidation resistance at 600 °C is achieved for alloys containing more than 2.5 wt.% MgO. It has been established that, along with V2O5, MgO6V2, and Mg2O7V2 are formed, which are presumed to enhance oxidative stability. Furthermore, the possible transformation of Mg‐vanadates through reaction with CO2, which presumably occurs in this ...
Ievgen Solodkyi +5 more
wiley +1 more source
Metallurgical aspects of rock bolt environment fracture
, 2005 The aim of this research was to understand the Stress Corrosion Cracking (SCC) of rock bolts. The laboratory tests have produced fracture surfaces similar to those from service.
Villalba, Ernesto +5 more
core
Advanced Engineering Materials, EarlyView.Postbuild annealing systematically modifies the phase fractions and morphology of EB‐PBF processed Mo–9Si–8B. Quantitative microstructure–property correlations reveal how controlled phase evolution enhances high‐temperature compressive strength and creep resistance.
Christopher Schmidt +5 more
wiley +1 more source
Accidental separation and lodgment of rotary endodontic file into the dentist's thumb
Indian Journal of Dental Research, 2016 Separation of the endodontic instrument within the root canal system and sharp injuries to the dentist is not an uncommon event in endodontic practice. Although root canal instruments can fracture at any stage of endodontic treatment, its fracture within
Rohit Karnik +3 more
doaj +1 more source