Results 101 to 110 of about 1,689 (259)
Catalytic Oxidation of CO and VOC in Flue Gas of Coffee Roasting Machines
Platinum‐coated cordierite monoliths effectively oxidized CO and VOC in coffee roasting exhaust with higher Pt loadings lowering light‐off temperatures. Scaled up 90 g/ft3 catalyst in a 5 kg roaster achieved 96% CO and around 78% VOC conversion at 350°C, highlighting stable operation requires flue gas temperatures ≥350°C.
Till Hauswald +3 more
wiley +1 more source
A novel bubbling fluid bed reactor for the autothermal pyrolysis of waste plastics
Abstract A new pilot‐scale fluidized bed reactor operated under continuous conditions was developed and tested for the thermal pyrolysis of high‐density polyethylene (HDPE). The study focused on assessing the reliability and operability of the system under different operating conditions (400–550°C), while monitoring mass and energy balances, product ...
Khadija Olivia Ogoula Igouwe +4 more
wiley +1 more source
(177)Chlorinated Insulating Oils. On the Oxidation of the Chlorinated Insulating Oils
Syunzi Kawamatsu +2 more
openaire +2 more sources
ABSTRACT Growing concerns about the environmental and social consequences of plastics around the world, manufacturing industries are associated with business are focusing on sustainable end‐of‐life options‐based solutions which aim at increasing the product life cycle.
Sivakumar Kirupanandan +3 more
wiley +1 more source
Crystallization of Cathode Active Material Precursors from Tartaric Acid Solution
This work investigates a novel approach for closing the gap between recycling and production of lithium‐ion battery cathode material. The new concept is based on antisolvent crystallization of metal carboxylates, which can be directly used as precursors in production of cathode material.
Chunyan Ma +5 more
wiley +1 more source
This study demonstrates the feasibility of an underground closed‐loop thermal storage facility at a post‐mining site, intended for seasonal heat energy storage. Its principal design shows water flow directions in winter and summer (1, 2), heat pumps (3), an upper water reservoir (4), and connecting pipes (5).
Dmytro Rudakov, Oleksandr Inkin
wiley +1 more source
The graphical abstract illustrates a reconstructed in situ thermo‐hydro‐mechanical (THM) framework in which porosity serves as the central variable linking stress, pore pressure, and temperature to evolving mechanical properties of rocks. Under burial conditions, in situ stress, pore pressure, and temperature jointly govern volumetric strain and ...
Mingyuan Lu +5 more
wiley +1 more source
A triflate‐functionalized Ni–Ce/MOF–OTf superacid enables low‐temperature (∼140°C) in situ upgrading of ultra‐deep heavy oil. It reduces viscosity by 92.11% in 12 h, maintains activity over cycles, and delivers 90.25% recovery with a lower carbon footprint by selective bond cleavage. ABSTRACT Ultra‐deep heavy oil is an important unconventional resource,
Li Wang +5 more
wiley +1 more source

