Results 51 to 60 of about 4,119 (241)
Influence of Nanosilica on Mechanical Performance in Woven Carbon/Kevlar/Epoxy Hybrid Composites
Journal of EngineeringThe study focus on fiber-reinforced polymer composite materials, which are widely used in the mechanical industries for various applications. While using the composite materials, mechanical properties such as tensile, flexural, and interlaminar shear ...
Pranesh K. G. +6 more
doaj +1 more source
Investigation of cutting-induced damage in CMC bend bars
MATEC Web of Conferences, 2015 Ceramic matrix composites (“CMC”) with a strong fibre-matrix interface can be made damage-tolerant by introducing a highly porous matrix. Such composites typically have only a low interlaminar shear strength, which can potentially promote damage when ...
Neubrand A. +4 more
doaj +1 more source
Materials Research Express, 2022 The aim of this paper is to study the interlaminar shear behavior of CFRP in critical service conditions. The specimens were immersed in the prepared artificial seawater for 7 months to investigate the ageing time, ambient temperature and salt ...
Hailin Li +3 more
doaj +1 more source
Size Effects in Interlaminar Tensile and Shear Strength of Unidirectional Glass Fibre-Epoxy
, 1996 Curved beams tested in four point bending were used to measure interlaminar tensile strength, and straight beams loaded in three point bending to measure interlaminar shear strength.
Michael R. Wisnom +3 more
core +1 more source
Advanced Science, EarlyView.This study combines full‐field tomography with diffraction mapping to quantify radial (ε002$\varepsilon _{002}$) and axial (ε100$\varepsilon _{100}$) lattice strain in wrinkled carbon‐fiber specimens for the first time. Radial microstrain gradients (−14.5 µεMPa$\varepsilon \mathrm{MPa}$−1) are found to signal damage‐prone zones ahead of failure, which ...
Hoang Minh Luong +7 more
wiley +1 more source
Polymer Composites, EarlyView.High‐performance PPS composites for FFF: formulation and characterization linking microstructure and crystallization to adhesion and mechanical properties. ABSTRACT Polyphenylene sulfide (PPS) was compounded with recycled carbon fibers (rCF) and thermal black (TB) particles, followed by injection molding (IM) and extrusion of the compounded composites ...
Dogan Arslan +3 more
wiley +1 more source
Polymer Composites, EarlyView.AMPRO BIO/flax fiber composites with different fiber orientations fabricated by vacuum bagging for potential use in biomedical and automotive fields. ABSTRACT Replacing traditional thermoset resins with performing bio‐based alternatives plays a crucial role in the development of new sustainable composite materials.
Elisa Toto +4 more
wiley +1 more source
Case Studies in Construction MaterialsThe application of non-metallic glass fiber-reinforced polymer (GFRP) bars as embedded reinforcement in reinforced concrete (RC) has been of great interest among researchers and practicing engineers alike, owing to its properties such as high strength-to-
Mesfer M. Al-Zahrani
doaj +1 more source
e-Polymers, 2023 A series of aliphatic amine-functionalized multiwalled carbon nanotubes (MWCNTs) wherein varied secondary amine numbers were grafted on the MWCNTs’ surface were synthesized and further dispersed onto the glass fibers for reinforcing epoxy-based ...
Li Yue, Zeng Shaohua
doaj +1 more source
Polymer Composites, EarlyView.Rate‐dependent performance of composite adhesive joints using thermoset and thermoplastic adhesives, in terms of toughness and fatigue behaviour. ABSTRACT A recently developed hot‐melt adhesive (HMA) based on cyclic olefin chemistry, supplied as a transparent, non‐tacky thermoplastic film with a distinctive polymer microstructure, was evaluated in this
Hossein Malekinejad +3 more
wiley +1 more source