Results 81 to 90 of about 2,211 (202)

Performance of Glass Fiber Composites With Plastic‐Waste Pyrolysis Char as Filler

Polymer Composites, Volume 47, Issue 16, Page 14769-14787, 20 August 2026.
Valorisation of mixed plastic waste into carbonaceous char via pyrolysis, its integration as a microfiller in epoxy/E‐glass (GFRP) laminates, and characterisation to assess composite performance as a function of filler loading. ABSTRACT Plastic pyrolysis offers circular solutions for mixed plastic waste but leaves a carbonaceous char that is often ...
Jerome Anokwu, Andrew Clark, Natalie Ferry, Levingshan Augusthus‐Nelson   +3 more
wiley   +1 more source

Enhancing Interfacial Adhesion and Toughness of Flax Fabric/Polylactic Acid Biocomposites Through Polyethylene Glycol Treatment

Polymer Composites, Volume 47, Issue 16, Page 14848-14858, 20 August 2026.
Production of flax fabric/polylactic acid biocomposite. ABSTRACT The development of fully biodegradable composites has gained significant attention as a sustainable alternative to traditional fiber‐reinforced materials. This study focuses on enhancing the interfacial adhesion and toughness of flax fiber‐reinforced polylactic acid (PLA) biocomposites ...
Aylin Altınbay
wiley   +1 more source

Material Composition Design and Anticracking Performance Evaluation of Asphalt Rubber Stress-Absorbing Membrane Interlayer (AR-SAMI)

Advances in Materials Science and Engineering, 2018
To promote the application of the asphalt rubber stress-absorbing membrane interlayer (AR-SAMI), the material composition design and the evaluation of antireflective cracking effect of AR-SAMI need to be studied. In this paper, conventional asphalt tests,
Ke Zhang, Zhengqi Zhang, Yaofei Luo
doaj   +1 more source

Comparison of interlaminar and interfacial shear strength with recycled carbon fiber

, 2023
Testing the interlaminar shear strength (ILSS) of composites using a short beam shear (SBS) test takes time. Micro-scale interfacial shear strength values (IFSS) need to be scaled back to the macro-level if a more reliable picture of the composite behavior on the right scale is desired.
Sarlin Essi, Savolainen Jesse, Palola Sarianna   +2 more
openaire   +2 more sources

A Review of Mechanical Reinforcement and Piezoresistive Self‐Sensing in Carbon Nanotube Fiber Composites

Polymer Composites, Volume 47, Issue 16, Page 14313-14338, 20 August 2026.
PSPP‐TRL mapping of CNT‐modified CFRP literature, with four recurring confusions resolved and five scale‐up problems quantified. ABSTRACT Carbon nanotube‐modified fiber composites are often presented as a route to stronger, tougher, and self‐sensing structural materials.
Sanan H. Khan
wiley   +1 more source

Mode I and Mode II Interlaminar Fracture Toughness of Basalt/Kevlar Fiber Reinforced Epoxy Resin Hybrid Composites Incorporating Graphene Nanoplatelets

Polymer Composites, Volume 47, Issue 16, Page 14940-14950, 20 August 2026.
Processing the Mode I and Mode II fracture analysis Basalt/Kevlar fiber reinforced hybrid composites with GnP. ABSTRACT This research examines the Mode I and Mode II fracture behavior of basalt/Kevlar fiber reinforced epoxy hybrid composites augmented with graphene nanoplatelets (GnP). Hybrid composites containing varying concentrations of GnP (0, 1, 2
Mehmet Bulut, Ömer Yavuz Bozkurt, Atban R. Abdo, Ahmet Erkliğ   +3 more
wiley   +1 more source

Assessing and Quantifying Variability Across Vacuum‐Assisted Resin Infusion Variants for Aerospace‐Grade Composite Manufacturing

Polymer Composites, Volume 47, Issue 15, Page 13664-13684, 10 August 2026.
Radar‐plot comparison of consolidation quality and flexural performance of composite laminates manufactured by six vacuum‐infusion routes, evaluated at the resin‐inlet and vacuum‐port regions. ABSTRACT Conventional vacuum‐assisted resin transfer molding (C‐VARTM) is recognized as a cost‐effective resin infusion technique for manufacturing large‐scale ...
Ilhan Kahraman, Nilperi Uysal, Çağlar Subaşı, Selin Dursun, Muhammet İskender, Özgü Çalın, Uğur Şimşir, Hatice S. Sas, A. Tuğrul Seyhan   +8 more
wiley   +1 more source

Thermoplastic‐Resin Transfer Molding Technology: Development and Challenges Toward Industrialization

Polymer Composites, Volume 47, Issue 15, Page 13317-13358, 10 August 2026.
Illustration of the key aspects involved in the manufacture of thermoplastic composites by T‐RTM highlighting the relationships between raw materials, resin mixing strategies, polymerization parameters, and processing equipment ranging from laboratory to industrial scale. ABSTRACT Driven by increasingly stringent international environmental regulations,
Filipe P. Martins, Paulo S. Lima, Ricardo Torcato, Laura Santos, J. M. Oliveira   +4 more
wiley   +1 more source

Additive manufacturing of continuous carbon fiber reinforced PETG with ultra-high interlaminar shear strength

Journal of Materials Research and Technology
Composite materials are high-performance materials formed by the optimal combination of material components with different properties through advanced material preparation techniques. In recent years, additive manufacturing of continuous fiber composites
Wenbo Wang, Yong Hu, Lei Yang, Yudong Lin, Lei Zhou, Jiayun Ma, Bing Liu, Xuan Cai, Chunze Yan, Yusheng Shi, Xiyong Chen   +10 more
doaj   +1 more source

Manufacturability‐Aware Multi‐Objective Screening of Filament‐Wound Type IV Pressure‐Vessel Cylindrical Sections Using Dual‐Pressure Hashin Constraints

Polymer Composites, Volume 47, Issue 15, Page 13854-13875, 10 August 2026.
Manufacturability‐aware multi‐objective screening of Type IV filament‐wound composite pressure‐vessel cylindrical sections toward lightweight and high‐strength designs. ABSTRACT A manufacturability‐aware preliminary screening framework is proposed for the straight cylindrical section of filament‐wound Type IV composite pressure vessels.
Önder Albayrak, Ahmet Çalık
wiley   +1 more source