Results 91 to 100 of about 1,299,970 (252)

Tunable amylopectin graft copolymers for flocculating and dewatering iron ore tailings

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Polyacrylamide (PAM), the standard flocculant for mining tailings, often produces turbid supernatants and poorly dewatered sediments, limiting water reuse and tailings densification. We synthesized amylopectin‐graft‐poly[(2‐methacryloyloxy)ethyl]trimethylammonium chloride (AP‐g‐PMETAC) copolymers with systematically varied graft frequency (N = 
Gustavo P. Zago, Reinaldo Giudici, João B. P. Soares   +2 more
wiley   +1 more source

Natural South African iron‐rich sand as a functional catalyst in hybrid photocatalytic wet peroxide oxidation technology for the degradation of methyl orange dye pollutant

The Canadian Journal of Chemical Engineering, EarlyView.
This research explored South African iron‐rich sand (SAIRS) as a natural catalyst for light‐mediated wet peroxide oxidation of methyl orange dye in wastewater and at an optimized of conditions of 3500 mg/L catalyst dose, 6 mM H2O2, and pH 2.5, SAIRS achieved 94% methyl orange degradation within 90 min under visible light.
Aaliyah Ebrahim, Stephen Sunday Emmanuel, Alicia Levana Dorling, Shepherd M. Tichapondwa   +3 more
wiley   +1 more source

Safety soft sensor development for pilot‐scale ilmenite electric arc furnace using long short‐term memory‐based architecture

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Ilmenite electric arc furnaces (EAFs) are used for smelting titanium‐iron oxide ore at high temperatures generated by electrical arcs to produce titanium slag and pig iron. As these units are pushed to their limits, ensuring safe and reliable operation becomes challenging.
Antony Gareau‐Lajoie, Djogap F. Chrysler J., Daniel Rodrigues, Marie‐Ève Gosselin, Moncef Chioua   +4 more
wiley   +1 more source

Research on prediction model of iron ore powder sintering foundation characteristics based on FOA-Catboost algorithm

Alexandria Engineering Journal
Sintered ore is the most important incoming iron material for blast furnaces in China. The foundation characteristics of sintering are an important basis for the sintering process of iron ore powder and a key indicator for evaluating the quality of iron ...
Yifan Li, Yuanshuai Duan, Yuan Zhou, Jintang Yang, Fei Li, Aimin Yang   +5 more
doaj   +1 more source

Advancing mine pillar design: Evaluating traditional methods and integrating AI for enhanced stability of pillars in the Great Dyke, Zimbabwe

Deep Underground Science and Engineering, EarlyView.
B1 is bord width 1, B2 is bord width 2, L is the pillar length, W is the pillar width, red color and letter A represent the pillars, and white color and number 1 represent excavated areas. Pstress is the average pillar stress; σv is the vertical component of the virgin stress, MPa; and e is the areal extraction ratio. e = B o B o + B P ${\rm{e}}=\frac{{
Tawanda Zvarivadza, Hendrik Grobler, Peter Apata Olubambi, Moshood Onifade, Manoj Khandelwal   +4 more
wiley   +1 more source

Uniaxial compressive strength prediction and ratio parameter optimization of titanium tailings composite backfill materials using intelligent hybrid models

Deep Underground Science and Engineering, EarlyView.
Based on the 90 datasets, ERT and four optimization algorithms were used to build four hybrid models to predict the UCS of the backfill body. The SMA‐ERT model was the most effective model, and it can reliably guide the design of the backfill ratio parameters. Abstract This study analyzed the feasibility of using titanium (Ti) tailings as a backfilling
Weijun Liu, Zida Liu, Zhixiang Liu
wiley   +1 more source

Quantitative Research for Global Iron Ore Breakeven Operating Cost Based on BIF-type Enriched Mineralization Characteristics

Yankuang ceshi, 2017
The benchmark comparative price between global seaborne iron ore and Chinese domestic iron ore is based on free on board (FOB) or cost, insurance and freight (CIF), resulting in imprecise market pressure price estimation for Chinese domestic iron ore ...
WANG Wei-ping, CHEN Yu-chuan
doaj   +1 more source

Recovery and Repurposing of End‐of‐Life Graphitic Anodes for Green Lithium‐Ion Batteries

EcoEnergy, EarlyView.
This review summarizes the degradation mechanisms of spent graphite anodes in lithium‐ion batteries and highlights key recycling, regeneration, and modification strategies, including hydrometallurgical and pyrometallurgical approaches. It also discusses recent advances in surface engineering, structural regulation, and material hybridization, offering ...
Wei Wei, Weiguo Liu, Jiangqi Zhou
wiley   +1 more source

Sustainable Revival of Spent Lithium Iron Phosphate Cathodes in Li‐Ion Batteries: Recycling and Surface Engineering Approaches

ENERGY &ENVIRONMENTAL MATERIALS, EarlyView.
Schematic illustration of the lifecycle of LiFePO4 cathodes. Lithiation and delithiation reactions happen through its discharging and charging processes. Recycling pathways including hydrometallurgy, pyrometallurgy, and direct regeneration enable sustainable reuse of spent LFP materials. Surface modification approaches (carbon, polymer, and metal/metal
Yan He, Ruigang Wang
wiley   +1 more source

Optimisation of Electrokinetic Extraction System: Colourimetric Determination of Copper (II) in Sand Using Polymer Inclusion Membrane

ELECTROPHORESIS, EarlyView.
Electrokinetic extraction (EKE) allows the direct transfer of heavy metals from soli samples, such as soil and sediment, into a polymer inclusion membrane (PIM) with a colourimetric detection. This avoids length and complex sampling handling and extraction processes.
Jia Jia Seet, Spas D. Kolev, Rosanne Guijt, Hong Heng See, Fernando Maya, Mostafa A. Atia, Eddie A. Nagul, Owen P. Missen, Michael Breadmore   +8 more
wiley   +1 more source