Results 131 to 140 of about 43,092 (302)

MXenes: Bridging the Gap Between Advanced Materials and Sustainable Technologies in Energy and Environmental Applications

Advanced Electronic Materials, EarlyView.
MXenes, a family of two‐dimensional transition metal carbides and nitrides, exhibit exceptional physical and chemical properties tunable through surface functionalization. This review summarizes recent advances in MXene synthesis, property modulation, and composite fabrication.
Fatemeh Saeedi, Erfan Zare, Reza Ansari, Mojtaba Haghgoo, Saeid Sahmani   +4 more
wiley   +1 more source

Capacitive Pixelated CMOS Electronic Nose

Advanced Electronic Materials, EarlyView.
A 1024‐pixel CMOS capacitive E‐nose with inkjet‐printed MOFs and polymer layers yields gas‐specific capacitance fingerprints under humid conditions, discriminating toluene from 2‐butanone at low power. ABSTRACT Although some of the human senses can nowadays be replaced by low‐cost electronic sensors such as microphones and image sensors, a compact low ...
M. A. Basyooni‐M. Kabatas, Tao Shen, Kaï Betlem, Chunyu Huang, Monique A. van der Veen, Frans Widdershoven, Murali K. Ghatkesar, Peter G. Steeneken   +7 more
wiley   +1 more source

The thermal stability and degradation mechanism of Cu/Mo nanomultilayers

Science and Technology of Advanced Materials
The microstructural evolution of Cu/Mo nanomultilayers upon annealing was investigated by X-ray diffraction and transmission electron microscopy. The isothermal annealing process in the temperature ranges of 300–850°C was conducted to understand the ...
Jeyun Yeom, Giacomo Lorenzin, Lea Ghisalberti, Claudia Cancellieri, Jolanta Janczak-Rusch   +4 more
doaj   +1 more source

Challenges and enablers in fluidization technology

AIChE Journal, EarlyView.
Abstract Gas–solid fluidized beds provide excellent heat and mass transfer for high‐throughput operations from coating to catalytic conversion and underpin emerging low‐carbon technologies. Yet industrial reliability, scale‐up, and control lag scientific understanding, particularly as finer, stickier, and more variable feedstocks increasingly challenge
J. Ruud van Ommen, Jia Wei Chew
wiley   +1 more source

The crystallization and crystalline properties of LARC-TPI [PDF]

LARC-TPI, a thermoplastic polyimide, has been studied in order to develop an understanding of its crystalline phase transition. Our experiments suggest that samples synthesized in different laboratories apparently had different degrees of imidization and
Gangal, Pravin D., Theil, Michael H.
core   +1 more source

A Physics Constrained Machine Learning Pipeline for Young's Modulus Prediction in Multimaterial Hyperelastic Cylinders Guided by Contact Mechanics

Advanced Intelligent Discovery, EarlyView.
A physics‐guided machine learning framework estimates Young's modulus in multilayered multimaterial hyperelastic cylinders using contact mechanics. A semiempirical stiffness law is embedded into a custom neural network, ensuring physically consistent predictions. Validation against experimental and numerical data on C.
Christoforos Rekatsinas, Panagiotis Krokidas, Vasileios Vavourakis, Clara Essmann, George Giannakopoulos   +4 more
wiley   +1 more source

Machine Learning‐Augmented Loop‐Mediated Isothermal Amplification‐Enabled Point‐of‐Care for Mpox‐Specific Detection

Advanced Intelligent Systems, EarlyView.
A low‐cost, portable point‐of‐care platform for rapid Mpox detection using loop‐mediated isothermal amplification is reported. The device integrates fluorescence readout and mobile monitoring. A machine‐learning model analyzes temperature data and correlates thermal changes with DNA concentration, enabling sensitive and reliable molecular diagnosis in ...
Nazente Atceken, Ahmed Choukri Abdullah, Olgac Ozarslan, Ziya Yıldız, Savas Tasoglu   +4 more
wiley   +1 more source

Development of high-emittance scales on thoriated nickel-chromium-aluminum-base alloys [PDF]

The surface regions of a DSNiCrAl alloy have been doped, by a pack diffusion process, with small amounts of Mn, Fe, or Co, and the effect of these dopants on the total normal emissivity of the scales produced by subsequent high temperature oxidation has ...
Seltzer, M. S., Wilcox, B. A., Wright, I. G.   +2 more
core   +1 more source

Experimental Study on the Enhancement of Heat Transfer Performance in Sintered‐Core Heat Pipes Using CuO Nanofluid

Asia-Pacific Journal of Chemical Engineering, EarlyView.
ABSTRACT This study presents the design and construction of an experimental system for evaluating the thermal performance of heat pipes, using sintered‐wick heat pipes charged with CuO nanofluids. The device used in this study is a sintered‐wick heat pipe, in which the liquid return is driven by capillary forces within the porous wick structure.
Dawei Yan, Kaiyu Dong, Sisi Yao, Lei Gao, Weijie Sun, Qian Zhou, Zixi Yu, Shuang Wang   +7 more
wiley   +1 more source

Engineering Biochar‐Derived Functional Materials for High‐Performance Supercapacitors: Design Principles, Mechanisms, and Scalable Strategies

Carbon Energy, EarlyView.
ABSTRACT Biochar has emerged as a useful and adaptable source of carbon for supercapacitor electrodes. Its value comes from the way biomass chemistry, thermal conversion, and activation conditions shape the resulting pore network, surface groups, and degree of carbon ordering.
Soumen Mandal, Avinash C. Mendhe, Mayna Roy, Neha S. Barse, Taejoon Park, Han‐Seung Lee, Haigun Lee   +6 more
wiley   +1 more source