Results 51 to 60 of about 1,984 (177)
Applicational properties of reinforced plywood with nanomaterials and kenaf fiber
BioResources, 2023 Kenaf fibers were added as a reinforcement between wood veneers of poplar (Populus deltoides) bonded with urea–formaldehyde (UF) resin to improve the applicational properties of standard three-layered plywood. Additionally, the influence of two different nanomaterials (nanocellulose and nanosilica)-modified UF resins on the performance of plywood was ...
Pantea Omrani +3 more
openaire +3 more sources
Polymer Composites, Volume 47, Issue 13, Page 12271-12288, 10 July 2026.Thermal, microstructural, and mechanical characterization of 3D‐printed PLA composite parts. ABSTRACT To address plastic waste and agricultural residue underutilization, this study evaluates the thermal (DSC and FTIR), microstructural (SEM), and mechanical behavior of polylactic acid (PLA) reinforced with flax fibers and olive pit particles, processed ...
P. N. B. Reis +6 more
wiley +1 more source
Rekomendasi implementasi keberlanjutan agroindustri serat kenaf pada jaringan rantai pasok hulu
AgrointekEnvironmental issues are a priority in the development of the kenaf fiber industry globally, because kenaf fiber is considered an environmentally friendly vegetable fiber when used as a raw material. This is revealed from the retting process which is the
Nunung Nurhasanah +6 more
doaj +1 more source
Engineering Reports, Volume 8, Issue 7, July 2026.Alkali‐treated hybrid sisal/false banana fiber‐reinforced polyester composites were fabricated by compression molding and evaluated experimentally and numerically. The 5 wt.% NaOH treatment improved fiber–matrix adhesion, enhancing tensile, flexural, and impact properties.
Fitiwi Gebrenigus Goshu +3 more
wiley +1 more source
SPE Polymers, Volume 7, Issue 3, July 2026.Symmetrical Jute/JUCO/Glass hybrid epoxy composites were reinforced with TiO2 and CuO microparticles. Incorporating 3 wt.% CuO increased tensile strength by up to 63.7%, while 3 wt.% TiO2 maximized flexural and impact properties alongside superior moisture resistance, demonstrating that these fillers significantly enhance natural fiber biocomposites ...
Nayan Sur +5 more
wiley +1 more source
Biomimetic Growth of Hydroxyapatite on Kenaf Fibers
BioResources, 2016 Biomimetic hydroxyapatite (HA) growth on mercerized kenaf fiber (KF) was achieved by immersion in a simulated body fluid (SBF) solution with the addition of a chelating agent. An electron micrograph revealed uniform HA layers on the KF within 14 days of immersion with significant vibrational peaks of HA components.
Saiful Izwan Abd Razak +7 more
openaire +3 more sources
Polymer Composites, Volume 47, Issue 12, Page 11300-11318, 20 June 2026.Schematic representation of hemp‐, glass‐, and carbon‐based laminated composite curved beams, including different stacking sequences and their vibration response. ABSTRACT In recent years, increasing environmental awareness has stimulated growing interest in natural fiber‐reinforced composites (NFRCs) due to their eco‐friendly composition ...
Aykut Çetin, Hasan Kurtaran
wiley +1 more source
Journal of Applied Polymer Science, Volume 143, Issue 23, June 15, 2026.From tomato sauce waste to sustainable packaging: tomato processing by‐products are upcycled as fillers in biodegradable polymers and processed through blown film extrusion to fabricate heavy‐duty bags, enabling a circular and value‐added use of agri‐food residues.
Francesco Paolo La Mantia +4 more
wiley +1 more source
International Journal of Polymer Science, 2016 This work addresses the results of experimental investigation carried out on mechanical and morphological properties of plain woven kenaf fiber reinforced PVB film which was prepared by hot press technique. The composites were prepared with various fiber
Suhad D. Salman +4 more
doaj +1 more source