Results 1 to 10 of about 296,793 (263)

The Wear of Seal Fins during High-Speed Rub between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates. [PDF]

open access: yesMaterials (Basel), 2021
Labyrinth seals as a noncontact sealing technology are widely used in aero-engine. To improve the efficiency of the aero-engine, the clearance between the rotor and stator must be as small as possible.
Lu B, Ma X, Wu C, Xuan H, Hong W.
europepmc   +2 more sources

Oil-Sealing Performance Evaluation of Labyrinth Seal Using Combined Finite Element Analysis and Computational Fluid Dynamics

open access: yesLubricants, 2023
Mechanical seals, such as labyrinth seals, are typically installed at the turbine outlets to prevent oil leakage. However, these seals undergo deformation because of the vibrations of the rotor, even during normal turbine operating conditions, which may ...
Won Man Park   +4 more
doaj   +2 more sources

Optimizing the Geometric Parameters of a Straight-Through Labyrinth Seal to Minimize the Leakage Flow Rate and the Discharge Coefficient

open access: yesEnergies, 2021
A straight-through labyrinth seal is one of the most popular non-contacting annular seals through which energy dissipation by turbulence viscosity interaction is achieved with a series of teeth and cavities.
Seung Il Baek, Joon Ahn
doaj   +2 more sources

Study on Leakage Performance and Rotordynamic Characteristics of a Novel Semi-Y Type Labyrinth Seal

open access: yesLubricants, 2022
A new type of labyrinth seal with semi-Y of rotor teeth (SYLS) is proposed in this paper. The rationality and accuracy of the numerical model are validated by the experimental results, and the static characteristics are investigated.
Huihao Su, Junlin Shi, Wenjie Zhou
doaj   +2 more sources

Rotordynamic analysis and leakage performance study of a hole diaphragm labyrinth seal using the CFD method

open access: yesAlexandria Engineering Journal, 2022
Improving rotor stability and reducing leakage at various working parts of gas turbines is an important topic that experts and scholars have always pursued.
Xiang Zhang   +4 more
doaj   +2 more sources

Research on leakage performance and dynamic characteristics of a novel labyrinth seal with staggered helical teeth structure

open access: yesAlexandria Engineering Journal, 2021
A novel labyrinth seal with staggered helical teeth (SHT) structure is proposed in this paper. The influence of seal clearance, pressure drop, tooth number and eccentricity on the novel model is studied by numerical simulation.
Wenjie Zhou   +6 more
doaj   +2 more sources

Nonlinear Dynamics of a Blade Rotor with Coupled Rubbing of Labyrinth Seal and Tip Seal

open access: yesShock and Vibration, 2021
The dynamic response and its stability of a blade rotor with coupled rubbing in the labyrinth seal and tip seal are investigated. The dynamic equations are established based on the Hertz contact rubbing force at the labyrinth seal and the tip rubbing ...
Huabiao Zhang   +3 more
doaj   +2 more sources

Bio-inspired optimization design and fluid–solid-thermal multi-field verification analysis of labyrinth seal

open access: yesMaterials & Design, 2022
Labyrinth seals are widely used in turbomachinery devices to prevent the leakage of fluid medium in seal structures. Under high parametrical environments, the heat generated by frictional resistance of the turbulence between the stator and rotor walls ...
Xiaojian Cao, Jialiang Li, Jianlin Liu
doaj   +2 more sources

Experimental Study on the Effect of Rubbing Mode on Radial Crack Initiation in Labyrinth Seal Fins of Shrouded Turbine Blade

open access: yesAerospace, 2022
The labyrinth-honeycomb seals have been widely used in aero-engine. However, radial cracks appear on labyrinth seal fins of shrouded turbine blade in use.
Yicheng Yang   +6 more
doaj   +2 more sources

Optimizing the labyrinth geometric parameters and modelling a new twin seal configuration for improved sealing efficiency in gas turbines

open access: yesFrontiers in Mechanical Engineering
Labyrinth seals are the non-contact seals used in turbo machinery to control the leakage of the secondary fluid flow. The main compressor supplies the compressed air required to generate hot gases in the combustion chamber.
B. Vijayaragavan   +2 more
doaj   +2 more sources

Home - About - Disclaimer - Privacy