Results 261 to 270 of about 42,501 (332)

Automated Process Optimization in a Novel Triple Shaft Mixer with Adaptive Mixing Modes

open access: yesChemie Ingenieur Technik, EarlyView.
A novel multi‐purpose mixer with adjustable blade angle and a coaxial stirrer is developed, providing three degrees of freedom. An optimization strategy is integrated to autonomously identify optimal operating conditions through automated tests. The current draw of the main stirrer serves as the optimization criterion, while stirrer speeds, directions,
B. Schwarz, H. Kniele, J. A. Lindner
wiley   +1 more source

Development of a Mechanically Regenerating Desublimator for Freeze‐Drying Systems in the Food Industry

open access: yesChemie Ingenieur Technik, EarlyView.
Thermal defrosting limits desublimator efficiency in freeze‐drying. This review and case study compares thermal versus mechanical regeneration, links frost properties and external heat transfer to energy demand, and summarizes pilot‐scale scraping results enabling single‐unit, continuous lyophilization.
Moritz Krummenacher   +3 more
wiley   +1 more source

Methodological Approach for Particle Transport: Analyzing Influential Factors and Comparing Simulation Software

open access: yesChemie Ingenieur Technik, EarlyView.
This study determines the dust filtration behavior of venting tubes in automotive headlights. Numerical simulations using Meshfree and STAR‐CCM+ and suitable experiments were conducted to analyze the airflow field, the particle transport, and the filtration efficiency.
Cornelia Müssig   +4 more
wiley   +1 more source

Global and Detailed Calculation of Tube Wall Temperature in a Process Furnace Steam Superheater

open access: yesChemie Ingenieur Technik, EarlyView.
This study presents a comparison between an iterative global model and multiple approaches to a new non‐iterative model with the purpose of predicting tube wall temperature of a superheater. The results show that the non‐iterative method achieves sufficient accuracy while improving the prediction of local temperature distribution and better ...
Anežka Michálková, Zdeněk Jegla
wiley   +1 more source

An Analytical Design Model of a Vacuum Pressure Swing Adsorption Process for Biogas Upgrading

open access: yesChemie Ingenieur Technik, EarlyView.
A steady‐state model was developed for a vacuum pressure swing adsorption (VPSA) process comprising adsorption, depressurization, and evacuation steps. The resulting analytical plant design model provides the optimal adsorber height required to achieve a target product purity with maximum bed utilization.
Thomas Welter   +3 more
wiley   +1 more source

Revisiting the synthesis of dimethyl carbonate from methanol and carbon dioxide

open access: yesThe Canadian Journal of Chemical Engineering, EarlyView.
Abstract The process for producing dimethyl carbonate (DMC) from carbon dioxide (CO2) and methanol is explored in this article. It provides an overview of the thermodynamics involved in DMC synthesis, discussing the challenges and potential solutions. The article highlights the reported use of catalysts and dehydrating agents to improve DMC yield and ...
Diego Alexander Santos Araque   +3 more
wiley   +1 more source

Diabetes alters cardiorespiratory dynamics: insights from short-term recurrence quantification analysis of pulse-respiration quotient. [PDF]

open access: yesFront Physiol
Reyes-Lagos JJ   +10 more
europepmc   +1 more source

Home - About - Disclaimer - Privacy