Results 11 to 20 of about 26,110 (226)
Market of innovative timber products in Europe and Serbia and their contribution to climate change mitigation [PDF]
Glasnik Šumarskog Fakulteta: Univerzitet u Beogradu, 2014 The paper shows results of researching the market of glued laminated timber as the most frequent innovative timber product in constructing timber framed residential facilities in Europe and Serbia.
Sretenović Predrag, Glavonjić Branko
doaj +1 more source
Flexural Properties of Wooden Nail Friction Welding of Laminated Timber
BioResources, 2022 The properties of single shear specimens connected by wooden nail frictional welding and twist nails were studied. The single shear properties of the specimens connected by wooden nail welding were lower than that of the twist nail specimens.
Xudong Zhu +9 more
doaj +2 more sources
Applied Sciences, 2021 The use of timber constructions recently increased. In particular, Cross Laminated Timber floors are often used in multi-story buildings. The development of standardization processes, product testing, design of details and joints, the speed of ...
Federica Bettarello +2 more
doaj +1 more source
Buildings, 2022 The main strength and elastic properties of structural timber products, such as glued laminated timber (glulam; GLT) and cross-laminated timber (CLT), are usually described via load-bearing models, which use the tensile properties parallel to the grain ...
Raimund Sieder, Reinhard Brandner
doaj +1 more source
Cost Factor Analysis for Timber–Concrete Composite with a Lightweight Plywood Rib Floor Panel
Buildings, 2022 With the growing importance of the principle of sustainability, there is an increasing interest in the use of timber–concrete composite for floors, especially for medium and large span buildings.
Karina Buka-Vaivade +2 more
doaj +1 more source
Mechanical Properties of Glued-Laminated Timber with Different Assembly Patterns
Advances in Civil Engineering, 2019 A glued-laminated timber section with mixed-grade laminae could make an efficient use of material strength and reduce the cost. A 4-point bending test was conducted on a total of 18 specimens to investigate the mechanical properties of glued-laminated ...
Shan Gao, Man Xu, Nan Guo, Ying Zhang
doaj +1 more source
Journal of Architectural Sciences and Applications, 2019 Uluslararası yapı üretiminde son yıllarda çok miktarda kullanılmakta olan "tutkallı tabakalı ahşap yapı elemanları ile oluşturulan taşıyıcı sistemler" in geçmiş yıllarda Türkiye’de hemen hemen hiç tanınmamış olması yakın zamanda bu sisteme karşı merak ve
Sinan Kayakıran, Emre Ki̇shalı
doaj +1 more source
Probabilistic sensitivity analysis to understand the influence of micromechanical properties of wood on its macroscopic response [PDF]
, 2017 This paper investigates the influence of the uncertainty in different micromechanical properties on the variability of the macroscopic response of cross-laminated timber plates, by means of a probabilistic sensitivity analysis.
DiazDelaO, FA +4 more
core +1 more source
Journal of Wood Science, 2021 Three-point bending tests were performed on specimens of glued laminated timber with different specimen heights to failure to determine the relationship between specimen height and bending strength under tension perpendicular to the grain.
Shigefumi Okamoto +4 more
doaj +1 more source
Development of timber concrete composite (TCC) beam with post-tensioning [PDF]
, 2020 Post-tensioning is a method of reinforcing (strengthening) concrete or other materials with high-strength steel strands or bars. The timber type that is used in all researches is the engineering timber products laminated veneer lumber (LVL) and glue ...
Obeed, Wissam Mushina
core