Results 91 to 100 of about 6,279 (248)
A double intercritical annealing strategy is proposed to tailor the multiphase microstructure and mechanical response of a medium‐Mn steel. The treatment produces an ultrafine mixture of ferrite, martensite and multiple austenite populations with graded thermal and mechanical stability, formed through austenite reversion and controlled retransformation.
Mattia Franceschi +3 more
wiley +1 more source
Damage Investigation of the Preform Operations for the Production of Rings for Ring Rolling
Void evolution during the preforming operations of two industrial ring rolling process routes is investigated by combining metallographic characterization with a two‐scale finite element simulation approach. The results reveal that, despite differing initial void conditions, the preforming operations can be designed to effectively influence void ...
Laurenz Kluge +6 more
wiley +1 more source
Abstract Precast reinforced concrete segmental linings are frequently used in modern tunneling. In these linings, the longitudinal joints typically have a reduced contact cross‐section and thus often govern the design, particularly in tunnels under high hydrostatic pressure or crossing squeezing or swelling ground with correspondingly high ...
Fabian Morger +2 more
wiley +1 more source
In order to scientifically predict the strength and deformation characteristics of large-area fill foundations, a comprehensive and systematic study is conducted on mechanical properties of transversely isotropic unsaturated remolded loess through ...
GUO Nan1 , YANG Xiaohui1, JIA Shining1, CHEN Zhenghan1, 2
doaj +1 more source
Large Scale Triaxial Compression Test on Sand at Low Confining Pressure
Fukushima, Shinji +3 more
openaire +2 more sources
Abstract This study introduces an innovative approach to strengthening defected reinforced concrete (RC) columns using externally bonded stainless steel and galvanized steel plates. Unlike conventional strengthening methods, this technique replaces traditional transverse stirrups with steel sheets, providing enhanced confinement and ductility.
Ahmed Hamoda +5 more
wiley +1 more source
A large-scale triaxial shear test was performed on a waste slag dam created from the accumulation of waste slag during the construction of a pumped-storage power station.
Ping Xu +5 more
doaj +1 more source
Flexural performance of concrete‐filled steel tubular beams with wood chip aggregate
Abstract This study investigates the flexural performance of concrete‐filled steel tubular (CFST) beams with partial replacement of aggregates by wood chips (0%–25%) through experimental and numerical analysis. This study is novel in that it experimentally and numerically investigates the flexural behavior of CFST beams with partial replacement of ...
Mizan Ahmed +6 more
wiley +1 more source
Abstract The use of fiber reinforced concrete (FRC) in precast tunnel segments is among the most established and representative applications of this material. Over the past two decades, numerous tunnel linings were constructed with partial or total substitution of conventional steel reinforcement by fibers, this yielding to quantifiable benefits in ...
Vladimir Rusanov +4 more
wiley +1 more source
:Base on several large-scale triaxial test results of the red layer non-cohesive soil rock mixture in Sichuan Basin, variation rules of strength parameters with the dry density, gravel content and the maximum particle size were studied.
gaochunyu +3 more
doaj

