Results 1 to 10 of about 53,132 (295)

An advanced rate‐dependent analytical model of lead rubber bearing

open access: yesEarthquake Engineering and Structural Dynamics
AbstractLead rubber bearings (LRBs) are a type of isolation bearing that have a combination of rubber and lead as the main components. These bearings are widely used in bridges, buildings, and other important structures due to their high load‐carrying capacity and excellent energy dissipation capability.
Ahm Muntasir Billah
exaly   +3 more sources

Amplification in Mechanical Properties of a Lead Rubber Bearing for Various Exposure Times to Low Temperature

open access: yesBuildings, 2023
In this paper, new formulations to predict the change in mechanical properties, namely, post-yield stiffness and characteristic strength of lead rubber bearings (LRBs) at low ambient temperatures, are proposed based on test results. Proposed formulations
Cansu Yasar   +4 more
doaj   +4 more sources

DESIGN AND PRODUCTION OF LEAD RUBBER BEARINGS FOR EARTHQUAKE ABSORBERS [PDF]

open access: yesEngineering Heritage Journal, 2023
Lead Rubber Bearing (LRB) is a passive type of base isolation that can be used as a damper for earthquake vibrations on bridges and buildings. The components that make up the LRB are several layers of rubber laminated to steel plates to increase vertical
Gambiro   +7 more
doaj   +2 more sources

Influence of Temperature on the Mechanical Behavior of Lead/Rubber Bearings. [PDF]

open access: yesPolymers (Basel)
The mechanical behavior of lead/rubber bearings (LRBs) is strongly influenced by both ambient temperature and hysteretic heating under seismic loading; however, their coupled effects and underlying mechanisms remain insufficiently understood. This study presents a systematic investigation of the thermo-mechanical response of LRBs through combined ...
Yang F, Zhang L, Pang H, Jiang T.
europepmc   +2 more sources

Practical application of lead rubber bearings with fail‐safe mechanism [PDF]

open access: yesJapan Architectural Review, 2019
The results of dynamic and quasi‐static loading tests for scaled and full‐scale Lead Rubber Bearing with Fail‐Safe mechanism, an alternative isolation bearing that consists of a conventional lead rubber bearing and a slider bearing in series, are ...
Hiroki Hamaguchi   +3 more
doaj   +3 more sources

Structural Systems Comparison of Simply Supported PSC Box Girder Bridge Equipped with Elastomeric Rubber Bearing and Lead Rubber Bearing

open access: yesCivil Engineering Dimension, 2022
This study compares the influence of elastomeric rubber bearing (ERB) as the regular bearing support and lead rubber bearing (LRB) as the seismic isolation device on the seismic performance of a seven-span simply supported prestressed concrete (PSC) box
Alvin Kurniawan Santoso   +6 more
doaj   +2 more sources

Potential Design of Seismic Vulnerable Buildings Incorporating Lead Rubber Bearing

open access: yesBuildings, 2019
The seismic hazard of vulnerable regions warrants the investigation of new technologies, such as base level isolation by lead rubber bearing (LRB) devices, that can help to mitigate structural damage on seismic prone buildings. The behavior adopting such
Walid A. Al-Kutti   +1 more
doaj   +3 more sources

ANALYTICAL PREDICTION OF MECHANICAL PROPERTIES IN HORIZONTAL DIRECTION OF LEAD-RUBBER BEARINGS

open access: yesFacta Universitatis. Series: Architecture and Civil Engineering, 2022
Application of seismic isolation devices is an efficient way for designing seismically resistant structures. For that purpose, various types of seismic isolation devices are developed. The main differences between them are in the materials used for their
Andrija Zorić   +4 more
doaj   +2 more sources

Shaking Table Tests of Lead Inserted Small-Sized Laminated Rubber Bearing for Nuclear Component Seismic Isolation

open access: yesApplied Sciences, 2021
To assure seismic isolation performance against design and beyond design basis earthquakes in the nuclear facility components, the lead inserted small-sized laminated rubber bearings (LRB), which has a 10 kN vertical design load, have been designed and ...
Gyeong-Hoi Koo   +2 more
doaj   +3 more sources

EFFECT OF USING LEAD RUBBER BEARING ON A STEEL ARCH BRIDGE

open access: yesJurnal Teknik Sipil, 2022
A study was conducted to evaluate the application of Lead Rubber Bearing (LRB) on bridge structures. The length of steel arch bridge is 80 m, width of 10 m, and height of 19.6 m. The bridge is simply supported with two bearings on each support. Structural analysis reveals that the lateral force on the bearing is more than 400 tons (835 tons in ...
Dyah Kusumastuti   +3 more
openaire   +2 more sources

Home - About - Disclaimer - Privacy