Results 31 to 40 of about 221,747 (248)

Enhanced analysis of gating latency in 0.35T MR‐linac through innovative time synchronization of a motion phantom and plastic scintillation detector

Journal of Applied Clinical Medical Physics, EarlyView.
Abstract Purpose This study aims to evaluate how different gantry angles, breathing rates (BPM), cine image speeds, and tracking algorithms affect beam on/off latency and the subsequent impact on target dose for a 0.35T MR‐Linac with a 6 MV FFF beam.
Mateb Al Khalifa, Tianjun Ma, Haya Aljuaid, Siyong Kim, William Y. Song   +4 more
wiley   +1 more source

Energy dependence of the GAFCHROMIC LD‐V1 in the diagnostic radiographic modalities

Journal of Applied Clinical Medical Physics, EarlyView.
Abstract The GAFCHROMIC LD‐V1 radiochromic film is widely used in dosimetry because it can provide high‐resolution two‐dimensional dose distributions without processing. This study aimed to evaluate the response characteristics at different effective energies, from the low‐energy range of mammography to the high‐energy range of computed tomography. Net
Tatsuhiro Gotanda, Tomoyuki Hasuo, Shinnosuke Nishihara, Kohsei Matsuura, Yasuyuki Kawaji, Hidetoshi Yatake, Shinya Imai, Takuya Akagawa, Nobuyoshi Tanki, Toshizo Katsuda   +9 more
wiley   +1 more source

Synchronization of light flash with the irradiation pulse in proton beam therapy: A case report

Technical Innovations & Patient Support in Radiation Oncology, 2023
The correlation between sensory light flash and proton beam delivery was evaluated by measuring the timing of pulse beam delivery and light flash sensing using an event recorder in an 83-year-old patient receiving proton beam therapy (PBT) for ...
Takashi Saito, Masashi Mizumoto, Yoshiko Oshiro, Toshio Miyamoto, Satoshi Kamizawa, Masatoshi Nakamura, Toshiki Ishida, Hirokazu Makishima, Haruko Numajiri, Kei Nakai, Takeji Sakae, Hideyuki Sakurai   +11 more
doaj  

Automated rapidplan model validation using Eclipse scripting API

Journal of Applied Clinical Medical Physics, EarlyView.
Abstract RapidPlan offers efficiency gains and quality improvements in treatment planning. Prior to its use in the clinic, it requires an extensive validation procedure in which established clinical plans and those generated by the model are compared. The manual iterative nature of this process is resource intensive, as numerous iterations are required
Bradley Beeksma, Andrew Dipuglia, Joerg Lehmann   +2 more
wiley   +1 more source

Beam model development and clinical experience with RadCalc for treatment plan quality assurance in online adaptive workflow with an MR‐linac

Journal of Applied Clinical Medical Physics, EarlyView.
Abstract Purpose The aim of this work was to report on the optimization, commissioning, and validation of a beam model using a commercial independent dose verification software RadCalc version 7.2 (Lifeline Software Inc, Tyler, TX, USA), along with 4 years of experience employing RadCalc for offline and online monitor unit (MU) verification on the ...
Urszula Jelen, Zoë Moutrie, Jack D Aylward, Michael G Jameson   +3 more
wiley   +1 more source

Optical Methods for Optimizing Fluorescence Imaging Field of View and Image Quality in Surgical Guidance Procedures

Diagnostics
Cancer surgery is aimed at complete tumor resection and accurate lymph node detection. However, numerous blood vessels are distributed within the tumor, and the colors of the tumor, blood vessels, and lymph nodes are similar, making observations with the
Jeongmin Seo, Jina Park, Kicheol Yoon, Sangyun Lee, Minchan Kim, Seung Yeob Ryu, Kwang Gi Kim   +6 more
doaj   +1 more source

Development and Validation of a One‐Dimensional Finite Difference Simulation Scheme for Polymer Laser Powder Bed Fusion with Application to the Effect of the Inter Layer Time

Advanced Engineering Materials, EarlyView.
The study presents an efficient simulation approach for the polymer laser powder bed fusion process polymers process, validated with polyamide 12, polyamide 6, and polyetherketoneketone. It shows that inter layer time affects part density, with 90s yielding dense parts.
Claas Bierwisch, Bastien Dietemann, Moritz Grünewald, Christian Schlör, Johannes Rudloff   +4 more
wiley   +1 more source

Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness

Advanced Engineering Materials, EarlyView.
Additive manufacturing of magnesium alloys by laser is difficult because the melting point of the oxide layer is much higher than the evaporation temperature of the metal underneath. Making the oxide layer thinner can solve this problem. Alloying magnesium with strontium makes the oxide layer thinner, especially at 0.5 wt%.
Elmar Jonas Breitbach, Stefan Julmi, Sabine Behrens, Tatiana Blank, Arvid Abel, Nicole Emminghaus, Ludger Overmeyer, Christian Klose, Hans Jürgen Maier   +8 more
wiley   +1 more source

Simulation of Inhomogeneous Refractive Index Fields Induced by Hot Tailored Forming Components

Advanced Engineering Materials, EarlyView.
This article presents a simulation model for simulating inhomogeneous refractive index fields (IRIF) in hot‐forged components, accounting for thermal influences and complex geometries. Through this simulation, a priori knowledge about the propagation of the IRIF can be obtained, allowing for the positioning of the component or an optical measurement ...
Pascal Kern, Lennart Hinz, Markus Kästner, Eduard Reithmeier   +3 more
wiley   +1 more source

Audio encryption using polarized light beam

APL Photonics
In recent years, the security of audio data has become paramount in terms of personal information, national security, and forensic evidence. However, most reported systems use digital algorithms and lack their implementation in the optical domain, which ...
Allarakha Shikder, Sudheesh K. Rajput, Naveen K. Nishchal, Osamu Matoba, Yasuhiro Awatsuji   +4 more
doaj   +1 more source