Results 21 to 30 of about 34,943 (216)

Effect of Martensite–Austenite Constituent on Low-Temperature Toughness in YS 500 MPa Grade Steel Welds

open access: yesMetals, 2018
The effect of martensite–austenite (M–A) constituents and simulated microstructure on low-temperature toughness was investigated in YS 500 MPa grade structural steel welds.
In Kim   +5 more
doaj   +1 more source

TiN-containing high-heat-input welding steels: Optimizing Ti/N ratio and precipitation temperature for enhanced low-temperature impact toughness in coarse-grained heat-affected zones

open access: yesJournal of Materials Research and Technology
To enhance the low-temperature impact toughness of the coarse-grained heat-affected zone (CGHAZ) in high-heat-input welding steels, TiN-containing steels with tailored Ti and N contents were designed.
Junjie Hao   +5 more
doaj   +1 more source

Study on impact toughness of TMCP and quenched and tempered high strength steels

open access: yesCase Studies in Construction Materials
In this study, the effect of steel rolling technique, temperature, yield strength and welding heat input on the impact toughness of high-strength steels is studied. The impact toughness of five kinds of high strength steels with yield strength of 550 MPa,
Jin Jiang   +4 more
doaj   +1 more source

Effect of Tempering Temperature on the Low Temperature Impact Toughness of 42CrMo4-V Steel

open access: yesMetals, 2018
Effects of tempering temperature on the microstructures and low temperature impact toughness of 42CrMo4-V steel were investigated. Microstructures of 42CrMo4-V steel after tempering at 570–720 °C for 3 h were experimentally investigated using scanning ...
Chen Sun   +4 more
doaj   +1 more source

A Simplified Laminar Flow Model for the Pultrusion of Glass Fiber/Polyethylene Terephthalate Commingled Yarns

open access: yesAdvanced Engineering Materials, EarlyView.
A simplified thermoplastic pultrusion model is developed to predict thermal fields in glass fiber/polyethylene terephthalate (GF/PET) composites with reduced computational cost. By combining effective material homogenization, validation against literature data, and Gaussian‐process‐based optimization, the study reveals how heating limits, pulling speed,
Elder Soares   +3 more
wiley   +1 more source

Electrochemical Behavior of Flame‐Sprayed Sc‐Doped AlCoCrFeMo High‐Entropy Alloy Coatings in 3.5% Sodium Chloride Solution

open access: yesAdvanced Engineering Materials, EarlyView.
Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar   +7 more
wiley   +1 more source

Effect of tempering temperature on low-temperature impact toughness of 35MnB steel

open access: yesJournal of Materials Research and Technology
Medium carbon boron steel is a cost-effective, high-strength steel used for bolts. This paper aims to provide a theoretical foundation and data support for optimizing heat treatment and improving performance in wind turbine bolts by systematically ...
Ping Ni   +4 more
doaj   +1 more source

Effect of Quenching Cooling Method on Low-temperature Impact Toughness of 20Cr1Mo1VTiB High Temperature Bolting Steel

open access: yesTeshugang, 2023
The effect of quenching cooling method on the mechanical properties of 20Cr1Mo1VTiB steel bar after overall heat treatment was studied through microstructure test methods such as mechanical property test, scanning electron microscope (SEM), transmission ...
Gong Xueting   +3 more
doaj  

Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C—Co composites with high hardness and high toughness

open access: yesJournal of Advanced Ceramics, 2022
In order to prepare high toughness (Ti,Zr,Nb,Ta,Mo)C ceramics at low temperatures while maintaining high hardness, a liquid-phase sintering process combined with Co-based liquid-phase extrusion strategy was adopted in this study.
Si-Chun Luo   +3 more
doaj   +1 more source

Mg effect on the cryogenic temperature toughness of Al-Mg alloys

open access: yesMaterials & Design, 2022
In this study, the Mg and temperature effects on cryogenic impact toughness of Al-Mg alloys are investigated. Cryogenic Charpy impact tests are conducted for several Al-Mg alloys: AA5083 (=reference), Al-6 Mg, Al-8 Mg, and Al-8.5 Mg.
Kwangtae Son   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy