Results 1 to 10 of about 70 (59)
Dielectric Spectroscopy of Hybrid Magnetoactive Elastomers [PDF]
Dielectric properties of two series of magnetoactive elastomers (MAEs) based on a soft silicone matrix containing 35 vol% of magnetic particles were studied experimentally in a wide temperature range. In the first series, a hybrid filler representing a mixture of magnetically hard NdFeB particles of irregular shape and an average size of 50 μm and ...
Vitaliy G Shevchenko +2 more
exaly +3 more sources
Magnetorheological Effect of Magnetoactive Elastomer With a Permalloy Filler [PDF]
Within the frames of this study, the synthesis of a permalloy to be used as a filler for magnetoactive and magnetorheological elastomers (MAEs and MREs) was carried out. By means of the mechanochemical method, an alloy with the composition 75 wt.% of Fe and 25 wt.% of Ni was obtained.
Andrey Zubarev +2 more
exaly +3 more sources
Microstructured Magnetoactive Elastomers for Switchable Wettability
We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix.
Mikhail Shamonin +2 more
exaly +5 more sources
Magnetoactive Elastomer Composites
Abstract This paper deals with the development of magnetoactive elastomers and the exploration of some of their potential applications. In the course of material development, samples of particle-filled silicone rubber were produced and their mechanical and magnetic properties were experimentally determined.
M Farshad
exaly +4 more sources
Magnetoactive Elastomers With Periodic and Random Microstructures
AbstractWe investigate the behavior of magnetoactive elastomers (MAEs) with periodic and random distributions of circular and elliptical fibers. For the MAEs with periodic microstructures, we develop finite element models and determine the local fields as well as the effective properties of MAEs with rectangular and quasi-hexagonal unit cells.
Stephan Rudykh +2 more
exaly +2 more sources
Magnetically Switchable Adhesion and Friction of Soft Magnetoactive Elastomers
Herein, the effect of an applied moderate (≈240 mT) magnetic field on the work of adhesion (WoA) of mechanically soft (the shear modulus ≈10 kPa) magnetoactive elastomer (MAE) samples with two different mass fractions (70 and 80 wt%) of carbonyl iron powder (CIP) is concerned.
Mikhail Shamonin +2 more
exaly +3 more sources
Fullerene-Containing Modifier of Magnetoactive Elastomer
Magnetoactive elastomer is a functional material whose properties are controlled by the parameters of the external magnetic field. A modifier that creates ordered structures with controlled nanoscale morphology is capable of intensifying the ability of a material to transfer charge.The modifier was obtained by dissociating C60 fullerene in eugenol at ...
Maria Vasilyeva
exaly +3 more sources
Tunable Drop Splashing on Magnetoactive Elastomers [PDF]
AbstractThe significant effect of an external dc magnetic field on the splashing behavior of ethanol drops impacting on the unstructured (flat) surface of soft magnetoactive elastomers (MAEs) is reported. The Weber number corresponding to the transition between the deposition and the splashing regime is reduced by ≈20% in a moderate magnetic field of ...
Gaia Kravanja +5 more
openaire +2 more sources
Analytical modeling of a magnetoactive elastomer unimorph
Abstract Magnetoactive elastomers (MAEs) are capable of large deformation, shape programming, and moderately large actuation forces when driven by an external magnetic field. These capabilities enable applications such as soft grippers, biomedical devices, and actuators.
Tan Pan +5 more
openaire +1 more source
Laser Micromachining of Magnetoactive Elastomers as Enabling Technology for Magnetoresponsive Surfaces [PDF]
AbstractA simple method for structuring of the surface of a magnetoactive elastomer (MAE) on the tens of micrometers scale, which capabilities extend beyond conventional mold‐based polymer casting, is reported. The method relies on the ablation of the material by absorption of nanosecond infrared pulses from a commercial laser.
Gaia Kravanja +5 more
openaire +3 more sources

