Results 11 to 20 of about 8,040,892 (242)
Polishing material removal correlation on PMMA – FEM simulation [PDF]
The complexity of polishing is very high and experience in this field is required to achieve reproducible deterministic results concerning shape accuracy.
Almeida R. +4 more
doaj +4 more sources
Development studies of lubricating fluids to accelerate removal of material from silicon nitride [PDF]
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The superior qualities of ceramics such as high hardness, chemical stability and wear resistance make them promising tribological materials for machine ...
Kaur, Gulsharan Rita
core +7 more sources
Material removal investigation in bonnet polishing of CoCr alloy [PDF]
The manufacture of orthopaedic joint bearings surfaces requires exceptionally high levels of control of not only the surface finish but also the surface form.
Blunt, Liam, Zeng, S., Jiang, Xiang
core +3 more sources
Grain-Size Effects on Multi-Wire Slurry Sawing of Translucent Alumina Ceramics
The technology of multi-wire sawing is well established in the production of silicon wafers but can also be applied in the production of ceramic substrates.
Lea Schmidtner +2 more
doaj +1 more source
In micro-electrical discharge machining (micro-EDM) milling, the cross-section of the microgroove machine is frequently not an ideal rectangle. For instance, there are arc shapes on the bottom and corners, and the sidewall is not steep.
Qi Jing +4 more
doaj +1 more source
Process parameter conditions such as vibrating motion, abrasives, pressure and tool wear play an important role in vibration-assisted polishing of micro-optic molds as they strongly affect material removal efficiency and stability. This paper presents an
Jiang Guo, Hirofumi Suzuki
doaj +1 more source
High-efficiency nano polishing of steel materials
The application of a specific rheological polishing slurry is proposed first for high-efficiency machining of steel materials to achieve high-quality ultraprecision finished surfaces. The rheology of the polishing slurry was explored to show that the non-
Li Min +2 more
doaj +1 more source
The effects of impacting particles from a jet of liquid on the removal of a surface material (on the impacted workpiece) were investigated. Experimental observations show that the cross section of the material removed changed from ‘W’-shaped to ‘U ...
Xuechu Zhao, Liran Ma, Xuefeng Xu
doaj +1 more source
The effects of lapping load in finishing advanced ceramic balls on a novel eccentric lapping machine [PDF]
HIPed (Hot Isostatically Pressed) silicon nitride ball blanks were lapped from diameter 13.255 mm to diameter 12.7 mm by a novel eccentric lapping machine. A maximum material removal rate of 68 μm/hour has been achieved under a nominal lapping load of 43
Kang, J, Hadfield, M
core +1 more source
Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements [PDF]
Two types of HIPed Si3N4 bearing ball blanks with different surface hardness and fracture toughness were lapped under various loads, speeds, and lubricants using a novel eccentric lapping machine.
Kang, J, Hadfield, M
core +1 more source

