Wood polymer composite bonded veneer based hybrid composites
Maderas: Ciencia y Tecnología, 2023 Wood veneer based composites have a great demand in present market as the material can utilize small diameter plantation timbers grown at short rotation cycle.
Siddhartha Arya +3 more
doaj +1 more source
Mechanical Properties of Ply-Lam Cross-Laminated Timbers Fabricated with Lumber and Plywood
European Journal of Wood and Wood Products, 2023 Abstract The mechanical properties of four ply-lam cross-laminated timbers (CLTs) containing a plywood layer were compared with those of glued laminated timber (GLT) and CLT. The bending, out-of-plane shear, compression strengths were highest in the GLT, which was followed by the ply-lam CLTs and CLT.
Seungmin Yang +3 more
openaire +1 more source
Journal of Wood Science, 2020 In this study, the mechanical performance of melamine–urea–formaldehyde (MUF) resin plywood composed of an orthotropic material, which is used as a structural material in liquefied natural gas (LNG) cargo containment systems (CCSs), is evaluated.
Seung-Joo Cha +7 more
doaj +1 more source
Investigation the Potential Replacement of the Old Corrugated Container (OCC) and Poplar Wood Flour Instead of Wheat Flour such as Urea-formaldehyde Adhesive Filler in the Plywood Industry [PDF]
Iranian Journal of Wood and Paper Industries, 2012 Considering the value and importance of wheat flour in our country, replacement of a new type of filler instead of wheat flour in glue combination in plywood industry is necessary.
Kazem D.Hosseini +3 more
doaj
Bond quality of poplar plywood reinforced with hemp fibers and lignin-phenolic adhesives
Composites Part C: Open Access, 2022 This study investigated the potential of plywood reinforced with short hemp fibers and bonded with lignin-phenol-formaldehyde adhesives for structural applications.
Ramesh Karri +3 more
doaj +1 more source
Impact of phenol film grammage on selected mechanical properties of plywood
Annals of WULS, Forestry and Wood Technology, 2020 Impact of phenol film grammage on chosen mechanical properties of plywood. For the purpose of this research several plywood samples with a thickness of 15 mm were produced and coated, in industrial conditions, with 5 different variants of phenol films varying in terms of grammage (40/120 g/m2, 60/145 g/m2, 60/167 g/m2, 80/220 g/m2, 2 × 80/220 g/m2 ...
Paweł Dyrwal, Piotr Borysiuk
openaire +2 more sources
SIFAT KAYU LAPIS PINUS DENGAN BEBERAPA MACAM KETEBALAN
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 Experimental plywood panels were made from bolts of tapped and untapped Pinus merkusii trees obtained from East Java. The bolts were rotary peeled into veneers of 1.5 mm, 2.0 mm and 3.0 mm thick.
Suwandi Kliwon +2 more
doaj +1 more source
SIFAT VENIR DAN KAYU LAPIS DARI KAYU SENGON DAN KARET PADA BEBERAPA MACAM UMUR
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 The result of the suitability study of two wood species as raw material for veneer and plywood are reported. The wood raw material used rubber wood (Hevea brasiliensis) and sengon (Paraserianthes falcataria).
M I Iskandar +2 more
doaj +1 more source
Properties of a Laminated Wood Composite Produced with Thermomechanically Treated Veneers
Advances in Materials Science and Engineering, 2016 The paper aimed at evaluating the properties of plywood made from thermomechanically treated wood veneers. Veneers from Amescla (Trattinnickia burseraefolia) wood were treated in a hydraulic press with electric resistance heating.
Larissa M. Arruda +1 more
doaj +1 more source
Applicational Properties of Reinforced Plywood with Nanomaterials and Kenaf Fiber
BioResources, 2023 Kenaf fibers were added as a reinforcement between wood veneers of poplar (Populus deltoides) bonded with urea–formaldehyde (UF) resin to improve the applicational properties of standard three-layered plywood. Additionally, the influence of two different
Pantea Omrani +3 more
doaj +2 more sources