The development of superior mechanical properties in medium-Mn requires the optimization of microstructural parameters such as retained austenite (RA) stability, volume fraction, and morphology.
A. Skowronek +4 more
semanticscholar +1 more source
The optimal use of tris-2-ethylhexylamine to recover hydrochloric acid and metals from leach solutions and comparison with other extractants [PDF]
This document is the Accepted Manuscript version of the following article: Uchenna Kesieme, Andreas Chrysanthou, Maurizio Catulli, and Chu Yong Cheng, ‘The optimal use of tris-2-ethylhexylamine to recover hydrochloric acid and metals from leach solutions
Catulli, Maurizio +3 more
core +2 more sources
Coiling simulations of medium-Mn sheet steels using dilatometry
Abstract The work presents the results of coiling simulations of two medium manganese steels containing 3 and 5% Mn. The steels were subjected to the heat treatment including an austenitization at 1000°C for 300s and next isothermal holding at temperatures of 750, 700, 650 and 500°C for duration of 5 hours.
M. Morawiec +3 more
openaire +1 more source
Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material [PDF]
Grinding is usually applied for particle reinforced metal matrix composites (PRMMCs) to achieve high ground surface quality. However, the surface quality especially surface roughness is difficult to predict theoretically due to different mechanical ...
Cai, Rui +5 more
core +1 more source
Direct observation of pitting corrosion evolutions on carbon steel surfaces at the nano-to-micro- scales. [PDF]
The Cl--induced corrosion of metals and alloys is of relevance to a wide range of engineered materials, structures, and systems. Because of the challenges in studying pitting corrosion in a quantitative and statistically significant manner, its kinetics ...
Balonis, Magdalena +6 more
core +2 more sources
Influence of heating parameters on flow stress curves of low-alloy Mn-Ti-B steel [PDF]
Influence of the initial grain size on hot deformation behavior of the low-alloy Mn-Ti-B steel was investigated. The uniaxial compression tests were performed in range of the deformation temperatures of 900-1200 degrees C and strain rates of 0.1-10 s(-1).
Kawulok, Petr +4 more
core +1 more source
Glioma cells mainly express the endothelin receptor EDNRB, while EDNRA is restricted to a perivascular tumor subpopulation. Endothelin signaling reduces glioma cell proliferation while promoting migration and a proneural‐to‐mesenchymal transition associated with poor prognosis. This pathway activates Ca2+, K+, ERK, and STAT3 signalings and is regulated
Donovan Pineau +36 more
wiley +1 more source
Acoustic Supercoupling in a Zero-Compressibility Waveguide
Funneling acoustic waves through largely mismatched channels is of fundamental importance to tailor and transmit sound for a variety of applications. In electromagnetics, zero-permittivity metamaterials have been used to enhance the coupling of energy in
Alù, A. +3 more
core +1 more source
A Method for Optimizing Chemical Composition of Steels to Reduce Radically Their Alloy Elements and Increase Service Life of Machine Components [PDF]
A method for optimizing chemical composition of steel is proposed and a correlation is established to reduce cardinally alloy elements in existing steel grades that results in high compressive residual stresses at the surface of intensively quenched ...
Kobasko, N. (Nikolai)
core +2 more sources
TBK1‐Associated Primary Lateral Sclerosis Followed by Right Temporal Variant Frontotemporal Dementia
ABSTRACT We report a 58‐year‐old woman with a novel splice‐site variant in the TANK‐binding kinase 1 (TBK1:c.993–2A>C p.Ala332TyrfsTer39) who sequentially developed primary lateral sclerosis (PLS) followed by right temporal variant frontotemporal dementia (rtvFTD). Neuroimaging demonstrated right anterior temporal atrophy before cognitive symptoms, and
Tomoyasu Matsubara +18 more
wiley +1 more source

