Results 271 to 280 of about 77,459 (311)
Some of the next articles are maybe not open access.
A Study on Metal-Ceramic Interface on Metal Base Dental Alloys
Key Engineering Materials, 2015Although the literature describes many studies that attempt to define and interpret the interaction between the metal component and overlying sintered ceramic mass, researchers still have conflicting opinions. It is not yet fully understood the hybrid layer occurrence phenomenon that rises by diffusion at the sintering temperature between the ...
Marian Miculescu +5 more
openaire +1 more source
Defect and Diffusion Forum, 2014
This study investigated actively brazing Alumina-to-Alumina with Ag-Cu-Ti as the filler metal system and Alumina-to-Copper with Cu-Ti-Co as the filler-metal system. The research was conducted on four samples, two of which were alumina brazed to alumina (Samples 1 & 2), and the other two were alumina brazed to copper (Samples 3 & 4).
D. Aliya +11 more
openaire +1 more source
This study investigated actively brazing Alumina-to-Alumina with Ag-Cu-Ti as the filler metal system and Alumina-to-Copper with Cu-Ti-Co as the filler-metal system. The research was conducted on four samples, two of which were alumina brazed to alumina (Samples 1 & 2), and the other two were alumina brazed to copper (Samples 3 & 4).
D. Aliya +11 more
openaire +1 more source
Surface and Coatings Technology, 2017
Abstract The paper presents results concerning microstructure and mechanical properties of the metal/ceramic and ceramic/ceramic multilayer coatings obtained on Ti6Al4V alloy by the PVD (Physical Vapour Deposition) vacuum arc method. During the work Cr/CrN, Ti/TiN and CrN/TiN multilayer coatings were deposited with the similar total thickness but a ...
P. Wiecinski +5 more
openaire +1 more source
Abstract The paper presents results concerning microstructure and mechanical properties of the metal/ceramic and ceramic/ceramic multilayer coatings obtained on Ti6Al4V alloy by the PVD (Physical Vapour Deposition) vacuum arc method. During the work Cr/CrN, Ti/TiN and CrN/TiN multilayer coatings were deposited with the similar total thickness but a ...
P. Wiecinski +5 more
openaire +1 more source
[The test of metal-ceramic bonding strength among three ceramic alloies].
Shanghai kou qiang yi xue = Shanghai journal of stomatology, 2006To compare the metal-ceramic bonding strength of different ceramic alloies.30 wax sheets were divided into 6 groups at random. Each group included 5 sheets. After being invested conventionally with Bellaves SH,the samples were casted and fused with porcelain.The metal-ceramic bonding strength was evaluated.The highest bonding strength was found in Bio ...
Wei-Shan, Ding +4 more
openaire +1 more source
Some aspects of non‐precious metal alloys for ceramic restorations
Australian Dental Journal, 1977Abstract— Comment is made regarding the cost, related to working properties, of non‐precious metal alloys compared to precious metal alloys for ceramics and their possible potential for the production of allergic response.
openaire +2 more sources
Properties of cobalt-chromium metal ceramic alloys after heat treatment
The Journal of Prosthetic Dentistry, 1990A comparison of mechanical properties of seven metal ceramic alloys in as-cast and heat-treated conditions resulted in significant differences. The alloys that were tested included seven cobalt-chromium metal ceramic alloys. Mechanical properties include strength, elongation, modulus of elasticity, and microhardness.
openaire +2 more sources
Tunable Chemical Disorder in Concentrated Alloys: Defect Physics and Radiation Performance
Chemical Reviews, 2022Yanwen Zhang, William J Weber
exaly
Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing
Nature, 2022Jie Ren +2 more
exaly
A review on the dynamic-mechanical behaviors of high-entropy alloys
Progress in Materials Science, 2023Bin Xiao
exaly