Results 31 to 40 of about 4,361,930 (292)
Microstructure and mechanical properties of bio-inspired Cf/Ti/Mg laminated composites
Inspired by an old fish skin structure, the Cf/Ti/Mg laminated composites were fabricated by squeeze casting technology. No porous or voids were found in final composite, and carbon fiber was uniformly dispersed in Mg matrix. Furthermore, the addition of
Xiaoshi Hu +4 more
doaj +1 more source
Hot extrusion of SiCp/AZ91 Mg matrix composites
SiC particles reinforced AZ91 Mg matrix composites (SiCp/AZ91) with SiC volume fractions of 5%, 10% and 15% were fabricated by stir casting. After T4 treatment, these composites were extruded at 350 °C with an extrusion ratio of 12:1. In the as-cast composite, particles segregated at a microscopic scale within the intergranular regions.
Xiao-jun WANG +4 more
openaire +1 more source
Anisotropy of reinforcement fibres and its influence on the apparent interfacial shear strength in thermoplastic composites [PDF]
Optimization of the stress transfer capability of the fibre-matrix interphase region is critical to achieving the required performance level in thermoplastic matrix composites.
Thomason, J.L.
core +4 more sources
In Vitro Corrosion Properties of Mg Matrix In Situ Composites Fabricated by Spark Plasma Sintering
Mg matrix in situ composites were fabricated from Mg and ZnO powder by a spark plasma sintering method. The composition and microstructure of the sintered samples were characterized.
Nguyen Q. Cao +5 more
doaj +1 more source
The compromise between strength and plasticity has greatly limited the potential application of particles reinforced magnesium matrix composites (MMCs). In this work, the Ti particles reinforced AZ31 magnesium (Mg) matrix composites achieved simultaneous
Junliu Ye +9 more
doaj +1 more source
The corrosion and wear behaviours of Al matrix hybrid composites prepared using bamboo leaf ash and alumina as reinforcements were investigated in chloride medium.
K.K. Alaneme +3 more
doaj +1 more source
In this paper, in situ SiC-reinforced Al-Zn-Mg-Cu composites were fabricated by laser powder bed fusion (LPBF). The effects of SiC content on the microstructure, phase composition, microhardness, and wear resistance of as-printed composites were ...
Zhigang Shen +3 more
doaj +1 more source
Wear Regimes Of Al-Cu-Mg Matrix Composites
Tribological behavior and wear regimes of ascast and heattreted Al-Cu-Mg matrix composites containing SiC particles were studied using a pin-on-disc wear testing apparatus against an EN32 steel counterface giving emphasis on wear rate as a function of applied pressures (0.2, 0.6, 1.0 and 1.4 MPa) at different sliding distances (1000, 2000, 3000, 4000 ...
R. N. Rao, S. L. Tulasi Devi
openaire +2 more sources
Degradation mechanism of the von Willebrand factor A2 domain by nattokinase
Nattokinase, a natto‐derived protease, exhibits potent antithrombotic effects. This study demonstrates that nattokinase directly cleaves the von Willebrand factor (vWF) A2 domain in vitro. Unlike the native regulator ADAMTS13, nattokinase degrades folded vWF independently of shear stress.
Ryuichi Hyakumoto +3 more
wiley +1 more source
In this paper, a new nanoscale metal Ti particle-reinforced Mg-3Al-1Zn matrix composite was successfully designed and prepared, which is mainly characterized by the fact that in addition to the “light” advantages of magnesium matrix composite,
Wei Tian +15 more
core +1 more source

