Results 71 to 80 of about 2,568,461 (274)

Micro-channel Cooling for Silicon Detectors

, 2016
Silicon tracking detectors employed in high-energy physics are located very close to the interactionpoints of the colliding particle beams. The high energetic radiation emerging from the interactioninduces defects into the silicon, downgrading the efficiency to collect the charges created by passingparticles and increasing the noise while data taking ...
openaire   +5 more sources

Advances in Sustainable and Wearable Textile Based Soft Robotics

Advanced Functional Materials, EarlyView.
This Review examines advances in wearable textile‐based soft robotics, focusing on sustainable materials, integrated sensing, and scalable actuation. It discusses manufacturing and system integration across healthcare, assistive robotics, prosthetics, and human–machine interfaces, and highlights key challenges in circular design, including life‐cycle ...
Zahir Abbas, Marzia Dulal, Sophia K. Novoselov, Victoria K. Novoselov, Kostya S. Novoselov, Shaila Afroj, Nazmul Karim   +6 more
wiley   +1 more source

Dissipative particle dynamics simulation of flow in periodically grooved three-dimensional nano- and micro-channels [PDF]

, 2011
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece.
Karakasidis, TE, Kasiteropoulou, D, Liakopoulos, A, 3rd Micro and Nano Flows Conference (MNF2011)   +3 more
core   +3 more sources

Bio‐Inspired Synthesis of Macroporous Single Crystal Particles as Scattering Agents

Advanced Functional Materials, EarlyView.
A general strategy is presented that delivers unique, single‐crystal microparticles that combine submicron macroporosity and uniform particle shapes. A bioinspired approach is used to occlude three distinct types of additives – polystyrene microspheres, polymer vesicles and amino acids – within calcite single crystals, and subsequent thermal annealing ...
Stephanie E. Foster, Gianni Jacucci, Ouassef Nahi, Thomas Kress, Zabeada Aslam, Stuart Micklethwaite, Alexander N. Kulak, Rik Drummond‐Brydson, Melinda J. Duer, Yi‐Yeoun Kim, Silvia Vignolini, Fiona C. Meldrum   +11 more
wiley   +1 more source

Heat Transfer Performance of Micro-channel Loop Heat Pipe Based on Distributed Parameter Model

Zhileng xuebao, 2022
A steady-state heat transfer model of a micro-channel parallel flow loop heat pipe was established based on the distributed parameter model. Model feasibility was verified experimentally, with a maximum relative error of 10.5%.
Tian Zhizheng, Han Chaoling, Chen Zhenqian   +2 more
doaj  

Electrospun Wood‐Derived Biopolymers as Electrodes in Electrochemical Energy Storage Technologies

Advanced Functional Materials, EarlyView.
Electrospinning transforms wood‐derived cellulose and lignin into architecturally defined, binder‐free carbon electrodes with tuneable porosity and functionality. This review shows how fibre design enables decoupled charge and mass transport, enhancing performance across battery systems, while identifying key challenges in spinnability, scalability ...
Michael W. Thielke, Hattie R. Chisnall, Jesus Vazquez Chavez, Ana B. Jorge Sobrido   +3 more
wiley   +1 more source

Numerical Simulation of the Performance of Jet Impingement Liquid-cooling Heat Sink with Different Key Parameters

Zhileng xuebao, 2021
At present, air cooling technology is unable to meet the needs of high-heat-flux electronic devices. Liquid cooling technology has received increasing attention. As a type of liquid cooling technology, jet impingement liquid cooling primarily use nozzles
Li Xueqiang, Bian Yali, Zhang Zhongyao, Xu Bingqing, Jiang Tao, Wang Yabo, Zhu Kai   +6 more
doaj  

Numerical Investigation of Flow and Mixing in a Microstirrer

Journal of Fluid Science and Technology, 2006
Low Reynolds number (Re ∼ 0.001) flow and mixing in a Y-shaped micromixer with a four-paddle rotor placed in its junction were investigated using computational fluid dynamics (CFD). The rotation speed of the rotor ω ranges from 100 to 2000 RPM (
Thien X. DINH, Yoshifumi OGAMI
doaj   +1 more source

A Novel Modified Petroresin Particle (MPRP) With Enhanced Oil–Water Selectivity for Cold Production in Heavy Oil Reservoirs

Advanced Functional Materials, EarlyView.
A novel oil–water selective conformance control agent, MPRP, is prepared via hydrophilic grafting and mechanical granulation. MPRP uniformly disperses in water, cohesively expands upon aging, and readily dissolves in the oil phase. During conformance control, it selectively aggregates in water channeling pathways to form effective plugs without ...
Guang Zhao, Dongfang Lv, Chang Liu, Changxu Wu, Yifei Liu, Caili Dai, Huazhou Li   +6 more
wiley   +1 more source

An artificial neural network for dimensions and cost modelling of internal micro-channels fabricated in PMMA using Nd:YVO4 laser [PDF]

, 2011
For micro-channel fabrication using laser micro-machining processing, estimation techniques are normally utilised to develop an approach for the system behaviour evaluation.
Brabazon, Dermot, Karazi, Shadi
core   +2 more sources