Results 61 to 70 of about 2,801,004 (322)
Energy Distribution Ratio into Micro EDM Electrodes
Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2010 Energy distribution ratio into micro EDM electrodes was determined based on the summation between the ratio of energy loss due to heat conduction within electrodes and ratio of energy carried away by debris.
Mohd ZAHIRUDDIN, Masanori KUNIEDA
doaj +1 more source
Design of a Prototype of Water Purification by Plasma Technology as the Foundation for an Industrial Wastewater Plant. [PDF]
, 2015 https://www.scopus.com/inward/record.url?eid=2-s2.0-84938099563&partnerID=40&md5=c53190f5ec3d59b3c1bee87e74b2f904In order to mitigate the contamination of water sources due to the spill of sewage without any kind of treatment, mainly generated by the ...
Barillas-Mora, Laura
core +1 more source
Advanced Engineering Materials, EarlyView.This plot compares experimental tensile stress–strain curves (with 4 different strain rates) and corresponding modelled curves (obtained using the optimised sets of Voce and Miller–Norton parameter values shown). The inferred M‐N values, characterizing the creep, are very similar to those obtained via conventional creep testing.
S. Ooi, R. P. Thompson, T. W. Clyne
wiley +1 more source
PhotonicsPartial discharge is a fault that occurs at the site of insulation defects within a transformer. Dual instances of partial discharge origination discharging simultaneously embody a more intricate form of discharge, where the interaction between the ...
Feng Liu +3 more
doaj +1 more source
Research Paper: Effect of Electrode Configuration on Electrical and Thermal Characteristics of Cold Atmospheric Pressure Surface Dielectric Barrier Discharge Plasma Devices [PDF]
فیزیک کاربردی ایرانThe geometrical configuration of the electrode significantly affects the physical and chemical properties of the discharge. This article presents the influence of cold atmospheric pressure Surface Dielectric Barrier Discharge (SDBD) plasma structures ...
Mohammad Mahdi Aghamolaei +2 more
doaj +1 more source
Oscillation modes of dc microdischarges with parallel-plate geometry
, 2011 Two different oscillation modes in microdischarge with parallel-plate geometry has been observed: relaxation oscillations with frequency range between 1.23 and 2.1 kHz and free-running oscillations with 7 kHz frequency.
Dragana Marić +7 more
core +1 more source
Improved corrosion resistance of commercially pure magnesium after its modification by plasma electrolytic oxidation with organic additives [PDF]
, 2018 The optimal mechanical properties render magnesium widely used in industrial and biomedical applications. However, magnesium is highly reactive and unstable in aqueous solutions, which can be modulated to increase stability of reactive metals that ...
Duque, Valentina +5 more
core +1 more source
Advanced Engineering Materials, EarlyView.Graphene nanoplatelet (0.1 wt.%) reinforcement significantly enhances the performance of β Ti‐28Nb‐35.4Zr alloy. Grain refinement, reduced water contact angle, and improved surface characteristics promote osteoblast adhesion and complete surface coverage after 7 days.
Khurram Munir +5 more
wiley +1 more source
Partial Discharges Acceptance Criteria for AC Rotating Machines Insulation Systems
IEEE AccessA new pass/fail criterion based on the shape analysis of phase-resolved Partial Discharges (PRPD) patterns is proposed in this study to overcome the problems generated by the use of partial discharge (PD) amplitude threshold levels.
Alfredo Contin, Andrea Piccolo
doaj +1 more source
OXIDE NANOMETRIC PELLICLES FORMATION BY APPLYING ELECTRICAL DICHARGES IN INPULSE [PDF]
Journal of Engineering Science (Chişinău), 2018 The paper presents the results of theoretical and experimental investigations of phenomena that accompany the formation of nanometer oxide and hydroxide pellicles by applying electrical discharges in impulse (EDI).
Topala, Pavel +2 more
doaj +1 more source