Results 1 to 10 of about 19,542 (118)
Injection of Viscous Micro-Droplet via Nozzle-Driven Piezoelectric Micro-Jet and Its Performance Control Method [PDF]
Micromachines, 2023 The inkjet printing technology based on piezoelectric micro-jets can effectively realize the efficient and high-precision processing of special-shaped structures. In this work, a nozzle-driven piezoelectric micro-jet device is proposed, and its structure
Ti-Yuan Shan +4 more
doaj +2 more sources
Comparative Influences of Fluid and Shell on Modeled Ejection Performance of a Piezoelectric Micro-Jet [PDF]
Micromachines, 2017 The piezoelectric micro-jet, which can achieve the drop-on-demand requirement, is based on ink-jet technology and small droplets can be ejected out by precise control.
Kai Li +3 more
doaj +2 more sources
Ultrasonics Sonochemistry, 2021 The removal of the adsorbed oil droplet is critical to deoiling treatment of oil-bearing solid waste. Ultrasonic cavitation is regarded as an extremely useful method to assist the oil droplets desorption in the deoiling treatment.
Fang Zhao, Qianqian Yan, Daolai Cheng
doaj +1 more source
Development and Application of Constant Flow Generating Injector with Pulse Energy Source as Driving Force [PDF]
한국정밀공학회지, 2019 A pulsed-power source has the advantage of releasing a peak power over a short time interval. In this study, we implemented two types of such energy source, namely laser and dielectric break down power sources.
Hwi Chan Ham +3 more
doaj +1 more source
Metals, 2021 Advanced high-strength steel (AHSS) steels are relatively not very well weldable because of the dominant martensitic structure with coarse ferrite and bainite.
Tomasz Węgrzyn +3 more
doaj +1 more source
Gas Mixtures for Welding with Micro-Jet Cooling
Archives of Metallurgy and Materials, 2015 Welding with micro-jet cooling after was tested only for MIG and MAG processes. For micro-jet gases was tested only argon, helium and nitrogen. A paper presents a piece of information about gas mixtures for micro-jet cooling after in welding.
Węgrzyn T.
doaj +1 more source
The Effect Of Different Micro-Jet Streams Number On Plastic Properties Of Welds
Archives of Metallurgy and Materials, 2015 The main goal of that paper was analysing of plastic properties of welds made with micro-jet cooling. New technology of micro-jet welding could be regarded as a new way to improve plastic properties of welds.
Hadryś D., Węgrzyn T., Piwnik J.
doaj +1 more source
Micro-jet Cooling by Compressed Air after MAG Welding
Archives of Foundry Engineering, 2016 The material selected for this investigation was low alloy steel weld metal deposit (WMD) after MAG welding with micro-jet cooling. The present investigation was aimed as the following tasks: analyze impact toughness of WMD in terms of micro-jet cooling ...
Węgrzyn T. +4 more
doaj +1 more source
Defence Technology, 2022 Three-dimensional (3D) micro-jet printing is a droplet deposition technique based on liquid-phase materials. To improve the deposition density and performance of energetic films with micro/nanoscale on an energetic chip, polydopamine (PDA) was utilized ...
Chun-yan Li +5 more
doaj +1 more source
Nitrogen And Oxygen Amount In Weld After Welding With Micro-Jet Cooling
Archives of Metallurgy and Materials, 2015 Micro-jet cooling after welding was tested only for MIG welding process with argon, helium and nitrogen as a shielded gases. A paper presents a piece of information about nitrogen and oxygen in weld after micro-jet cooling. There are put down information
Węgrzyn T., Piwnik J.
doaj +1 more source