Results 131 to 140 of about 23,768 (293)

Micro-milling of unreinforced and reinforced polypropylene

, 2017
It is essential to determine the micro-machinability performance of polymer and glass fiber–reinforced polymer composite in order to effectively utilize the polymer and its composite as an engineering material at the micro-scale world.
Emel Kuram
core   +1 more source

The Influence of Mesoscale Particle Structure on the Electrode Degradation and Resultant Electrochemistry of Lithium Ion Cells With Nickel Rich Lithium Nickel Manganese Cobalt Oxide Positive Electrodes

Advanced Materials Technologies, EarlyView.
Milled polycrystalline NMC811 cathode (MPC NMC) with smaller secondary particle and higher surface area had 1) greater cathode tortuosity, 2) reduced surface Ni on the cycled MPC cathodes consistent with surface reconstruction, and 3) increased Ni deposition from cathode‐anode crosstalk, manifesting in lower functional capacity and higher impedance ...
Edelmy J. Marin Bernardez, Andrew Nicoll, David J. Arnot, Armando Rodriguez Campos, Patrick J. Barry, Marie F. Millares, Cynthia Huang, Melissa A. Guercio, Grace K. Dono, Alexis Pace, Xianghui Xiao, Cherno Jaye, Conan Weiland, Jianming Bai, Hui Zhong, Michael Drakopoulos, Zhong Zhong, Nghia T. Vo, Xiao Tong, Esther S. Takeuchi, Amy C. Marschilok, Shan Yan, Kenneth J. Takeuchi   +22 more
wiley   +1 more source

Tunable 3D‐Printed Static Mixers for Gradient Bioprinting With High Cell Viability

Advanced Materials Technologies, EarlyView.
ABSTRACT The fabrication of native tissue‐like structures with gradual transitions in material properties, cell types, and growth factors remains a major challenge in biofabrication due to the lack of suitable methods. Mimicking the hierarchical organization of living tissues is essential for functional models, yet creating gradient, multimaterial ...
Florian Hofmann, Jessica Faber, Franz Moser, Alessandro Cianciosi, Nicoletta Murenu, Joachim Schenk, Katrin G. Heinze, Natascha Schaefer, Silvia Budday, Tomasz Jungst   +9 more
wiley   +1 more source

Optimization of Machining Parameters to Minimize Cutting Forces and Surface Roughness in Micro-Milling of Mg13Sn Alloy. [PDF]

Micromachines (Basel), 2023
Ercetin A, Aslantaş K, Özgün Ö, Perçin M, Chandrashekarappa MPG.   +4 more
europepmc   +1 more source

MSEC2008-72532 DETERMINATION OF CUTTING FORCES FOR MICRO MILLING [PDF]

, 2020
To enhance the implementation of micro milling, it is necessary to clearly understand the dynamic characteristics of micro milling so that proper machining parameters can be used to meet the requirements of application.
Zou-Sung Chiang, Shih-Ming Wang
core  

Additive‐Manufactured, Multifunctional Bioreactor Technology for Dynamic Culture of 3D Bioprinted Tissue Models

Advanced Materials Technologies, EarlyView.
We introduce an additively manufactured bioreactor with a perfusion flow system and integrated temperature and pH sensors for skeletal muscle tissue biofabrication. The bioreactor's performance was evaluated by assessing the viability, spreading of the myoblast cells in a printed scaffold, and contraction of the isolated murine musculi interossei ...
Lys Sprenger, Johann Schorzmann, Hsuan‐Heng Lu, Muhammad Osama, Julian Bauer, Michael Haug, Oliver Friedrich, Aldo R. Boccaccini, Frank Döpper, Sahar Salehi   +9 more
wiley   +1 more source

Optimal tool design in micro-milling of difficult-to-machine materials. [PDF]

Adv Manuf, 2023
O'Toole L, Fang FZ.
europepmc   +1 more source

FTS-based Face Milling of Micro Structures

, 2015
This article presents a technical concept and machining possibilities for milling of micro structures with a fast tool servo (FTS). The tool is capable of tool tip displacements with a variable frequency up to 4000Hz and an amplitude up to 30μm.
Köhler, J., Köhler, Jens, Seibel, A.
core   +1 more source

Shaping Carbon Nitrides for Advanced Macrostructures

Advanced Materials Technologies, EarlyView.
This review examines how carbon nitride can be shaped through a range of printing and interfacial assembly methods. By bringing together additive manufacturing and liquid–liquid structuring concepts, carbon nitride is moving beyond its traditional powder‐based photocatalyst form toward digitally designed robust macroscale architectures with high design
Simona Baluchová, Baris Kumru
wiley   +1 more source

Relationship between energy efficiency and surface morphologies in micro-milling of SLM Inconel 718

Journal of Materials Research and Technology
Selective laser melting (SLM) offers the advantages of a short production cycle and high material utilization in manufacturing components with complex geometric features. It is extensively utilized in aerospace, medical, and energy fields.
Xianyin Duan, Fengxiao Su, Shuaishuai Gao, Kunpeng Zhu, Ben Deng, Yu Zhang   +5 more
doaj   +1 more source