Results 81 to 90 of about 381,285 (254)

Vacuum‐Formed Composites Based on a Polyolefin and a High Content of Biomass‐Waste Fillers

Advanced Engineering Materials, EarlyView.
It is shown here that by the use of a very ductile polymer matrix, it is possible to vacuum‐form products that contain up to 25% of hard biofillers with still ductile properties. The results are promising and opens up for the use of engineered biocomposites derived from industrial side‐stream biofillers in vacuum‐formed products. A strategy to increase
Susanna K. Källbom, Tuomo P. Kainulainen, Xin‐Feng Wei, Antonio J. Capezza, Daniel Helgesson, Richard T. Olsson, Mikael S. Hedenqvist   +6 more
wiley   +1 more source

Antimicrobial Titanium–Copper Alloys: The Role of Microstructure in Arc‐Melted Compositions

Advanced Engineering Materials, EarlyView.
Copper‐containing titanium alloys show promise in combating orthopedic implant infections. This study explores the influence of heat treatment on Ti‐11.5Cu and Ti‐33Cu alloys, revealing that larger Ti2Cu precipitates (≈5 μm) enhance antimicrobial efficacy through increased surface contact. Results suggest contact sterilization is the primary mechanism,
Daisy Rabbitt, Paraic O’Kelly, Victor M. Villapún, Luke N. Carter, Alexander J. Knowles, Sophie C. Cox   +5 more
wiley   +1 more source

High‐Temperature Oxidation of the CrFeNi Medium‐Entropy Alloy

Advanced Engineering Materials, EarlyView.
The oxidation behavior of equiatomic CrFeNi MEA is a key issue that determines this material's suitability for high‐temperature application. The understanding of long‐term behavior is even more crucial than short‐term corrosion effects. The alloy is exposed to synthetic air at 1000, 1050, and 1100 °C for 24, 100, and 1000 h and systematically compared ...
Anna Maria Manzoni, Wencke Mohring, Mike Schneider, Guillaume Laplanche, Sebastian Peter Hagen, Christiane Stephan‐Scherb   +5 more
wiley   +1 more source

Residual Stress States in Microstructurally Graded PBF–LB/M Austenitic Steel Components

Advanced Engineering Materials, EarlyView.
This study examines microstructurally graded 316L rectangular tube profiles fabricated via PBF–LB/M using a dual‐laser system. A 1 kW top‐hat and a 400 W Gaussian laser create distinct grain sizes and crystallographic texture. Mechanical properties are linked to microstructural evolution driven by processing conditions.
Nico Möller, Florian Loebich, Thomas Wegener, Julia Richter, Jens Gibmeier, Thomas Niendorf   +5 more
wiley   +1 more source

Scanning electron microscopy in the tests of fibre-cement boards

MATEC Web of Conferences, 2018
The subject of this article is research on fiber-cement boards, which are currently used in civil engineering as cladding for ventilated facades, but also as internal claddings.
Adamczak-Bugno Anna, Świt Grzegorz, Krampikowska Aleksandra   +2 more
doaj   +1 more source

W‐Based Thin Film Metallic Glasses Doped with Ni, Zr, and B for Industrial Applications

Advanced Engineering Materials, EarlyView.
This work is the first to deal with a comprehensive comparison of two metallic glass systems, W–Zr–B and W–Ni–B, in terms of their suitability for specific industrial applications. Their mechanical and tribological properties are compared and discussed in combination with structural homogeneity on different types of technically relevant substrates and ...
Zbynek Studeny, Antonin Kubicek, Vjaceslav Sochora, Zdenek Pokorny, Stanislava Debnárová, Pavel Soucek   +5 more
wiley   +1 more source

Microstructural and Mechanical Properties of a Hard Anodic Coating Applied on an Elastically Prestrained Aluminum Substrate

Advanced Engineering Materials, EarlyView.
Prestraining the substrate influences coating formation process. Higher prestraining force leads to higher coating thickness and lower hardness. Increase in prestraining force enhances preliminary damage in hard anodic coating. Fatigue damage mechanisms change for hard anodized prestrained samples.
Linto George Thomas, Lisa Winter, Frank Simchen, Tobias Breitfeld, Thomas Lampke   +4 more
wiley   +1 more source

CALPHAD‐Guided Prediction and Interpretation of Phase Formation in Ta–Mo–Cr–Ti–Al Refractory High‐Entropy Alloys

Advanced Engineering Materials, EarlyView.
This study designs Ta–Mo–Cr–Ti–Al refractory high‐entropy alloys with a disordered body‐centered‐cubic A2 crystal structure aiming for improved ductility, lower density, and oxidation resistance. Four alloy compositions are identified by thermodynamic calculations.
Kateryna Khanchych, Chongchong Tang, Carsten Schroer, Björn Schäfer, Judith Jung, Michael Dürrschnabel, Ute Jäntsch, Bronislava Gorr   +7 more
wiley   +1 more source

CeO2 Nanostructures Prepared by Selective Water‐Soluble Sr3Al2O6(SAO)‐CeO2 Vertically Aligned Nanocomposite

Advanced Engineering Materials, EarlyView.
Highly textured CeO2 nanowires and nanoporous thin films are successfully synthesized by water dissolution of Sr3Al2O6 (SAO) from the SAO:CeO2 vertically aligned nanocomposites (VANs). The morphology of CeO2 can be varied by VAN composition. It demonstrates a new method for synthesizing nanostructured CeO2 without chemical etching or complex micro ...
Benson Kunhung Tsai, Jialong Huang, Jianan Shen, Yizhi Zhang, James P. Barnard, Claire A. Mihalko, Abhijeet Choudhury, Shiyu Zhou, Haiyan Wang   +8 more
wiley   +1 more source

Powder Metallurgy Preparation of Metastable β Ti–Cr–Ge Alloys for Medical Applications

Advanced Engineering Materials, EarlyView.
This study develops metastable β Ti–Cr–Ge alloys using powder metallurgy for biomedical implants. The Ti–10Cr–2Ge alloy exhibits superior mechanical performance with high yield strength (>1100 MPa), low Young's modulus (<85 GPa), and excellent strain hardening behavior.
Teddy Sjafrizal, Damon Kent, Ali Dehghan‐Manshadi, Matthew S. Dargusch   +3 more
wiley   +1 more source